We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR4 2400MHz CL17 DIMM memory upgrade

SKU CH-6CHR-87X41

8GB dual-channel DDR4 kit at 2400 MHz CL17, 1.2 V, unbuffered non-ECC DIMMs built for MSI Z490 and X570 boards

  • Capacity8GB (2 x 4GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 8GB dual-channel kit expands system memory
  • 2400 MHz DDR4 speed supports responsive multitasking
  • CL17 latency with 1.2V operation balances performance and efficiency
  • Non-ECC unbuffered DIMMs install directly into 288-pin slots
  • Tested for MSI Z490 and X570 motherboard compatibility

Capacity and Compatibility

This 8 GB kit contains two 4 GB DDR4 DIMMs rated at 2400 MHz with CL17 timings. It is validated for MSI MPG Z490 GAMING PLUS, MPG Z490M GAMING EDGE WIFI and PRESTIGE X570 CREATION motherboards. The modules are non-ECC, unbuffered and operate at 1.2 V. A 64-bit operating system is required to address the full capacity.

Sustained Load Behaviour

Under continuous workloads the memory runs at its rated 2400 MHz speed with 17-17-17 timings. All installed modules will operate at the slowest module's performance level or the processor's capability. Matched pairs are recommended to maintain dual-channel throughput during extended sessions.

Platform Limits

The supported platform provides four DIMM sockets and a maximum capacity of 128 GB. Mixing with other brands is possible but will reduce the entire array to the lowest common speed. This kit uses 288-pin DDR4 technology only and is not compatible with other memory generations.

Highlights

  • 8GB dual-channel kit expands system memory
  • 2400 MHz DDR4 speed supports responsive multitasking
  • CL17 latency with 1.2V operation balances performance and efficiency
  • Non-ECC unbuffered DIMMs install directly into 288-pin slots
  • Tested for MSI Z490 and X570 motherboard compatibility

Specifications

BrandComputer Memory Solutions
ModelCM512642400DIMM
Capacity8GB (2 x 4GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemMSI Motherboard MPG Z490 GAMING PLUS, MPG Z490M GAMING EDGE WIFI, PRESTIGE X570 CREATION
Package Content2 Memory RAM Sticks

Questions about this item

How much power do the 1.2V DDR4 2400MHz modules draw under sustained load?

Each module operates at the standard 1.2V DDR4 voltage, so typical power draw stays low even during continuous use.

What motherboard slot and CPU memory controller are required for this 288-pin DDR4 kit?

You need a board with four 288-pin DDR4 slots and a CPU that supports DDR4-2400, such as the listed MSI Z490 or X570 models.

Will these CL17 2400MHz sticks slow down my existing faster DDR4 memory?

Yes, all installed modules will run at the speed of the slowest kit, so adding this CL17 2400MHz pair reduces faster memory to 2400MHz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.