We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions CM10247210600ECCNREG 24GB (3x8GB) DDR3 1333MHz ECC Unregistered DIMM memory upgrade

SKU CH-ZANK-DDYFT

24 GB of DDR3 ECC memory in a three-module kit validated for Intel DX58OG and DX58S02 servers

  • Capacity24GB (3 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 24 GB total capacity across three 8 GB modules
  • ECC protection detects and corrects single-bit errors
  • DDR3 1333 MHz speed rated at PC3 10600
  • Unregistered DIMM design fits Intel DX58OG and DX58S02
  • 240-pin DDR3 form factor at 1.5 V operation

Purpose-built Server Upgrade

This 24 GB kit targets administrators who maintain Intel DX58OG or DX58S02 servers and need to expand memory without changing platforms. The three 8 GB modules fill half the available slots and keep the original DDR3 architecture intact.

ECC Unregistered Requirement

The motherboard demands ECC unregistered DIMMs; registered or non-ECC modules will not post. Each stick runs at 1333 MHz with CL9 timing at 1.5 V and uses a 2Rx8 organisation that matches the chipset specification.

Straightforward Slot Population

Installation is a matter of seating the 240-pin modules in the correct channels; no heat spreaders mean clearance is rarely an issue. The common mistake is mixing registered DIMMs or exceeding the 48 GB system limit, both of which prevent boot.

Highlights

  • 24 GB total capacity across three 8 GB modules
  • ECC protection detects and corrects single-bit errors
  • DDR3 1333 MHz speed rated at PC3 10600
  • Unregistered DIMM design fits Intel DX58OG and DX58S02
  • 240-pin DDR3 form factor at 1.5 V operation

Specifications

BrandComputer Memory Solutions
ModelCM10247210600ECCNREG
Capacity24GB (3 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemIntel DX58OG, DX58S02
Package Content3 Memory RAM Sticks

Questions about this item

Will 1333 MHz modules run at full speed in a system that supports DDR3 1333?

Yes, the kit is rated DDR3 1333 (PC3 10600) and will operate at that speed when the platform supports it.

Does the 240-pin DDR3 interface limit the usable bandwidth on these boards?

The 240-pin DDR3 DIMM slot carries the standard DDR3 1333 signal; the board's memory controller determines the final throughput.

Will the three 8 GB sticks fit the six DIMM slots on the Intel DX58OG or DX58S02?

Yes, each module is a standard 240-pin DDR3 DIMM and the boards provide six slots, so the 3-piece kit installs directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.