We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 registered DIMM sticks with black chips, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM10247210600ECCR2R4H 16GB (2x8GB) DDR3 1333MHz ECC Registered DIMM memory upgrade

SKU CH-E10F-4RDBD

16 GB DDR3 ECC registered DIMM kit (2 × 8 GB) at 1333 MHz for HP ProLiant DL380 G6 and G7 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB dual-channel kit for HP ProLiant DL380 G6/G7
  • ECC registered DDR3-1333 with CL9 latency for data integrity
  • 2Rx4 organisation on major-brand chips for server stability
  • 5 V operation matches original ProLiant specifications
  • Lifetime repair or exchange warranty against manufacturing defects

Server Memory Kit

This 16GB kit contains two 8GB DDR3 registered DIMMs built for HP ProLiant DL380 G6 and G7 servers. It delivers 16GB total capacity across two modules for straightforward installation in matched pairs. The ECC registered design targets data integrity in enterprise workloads. Buyers needing higher-density 16GB or 32GB single modules should look elsewhere.

Registered ECC with 2Rx4 Organisation

The modules run at 1333MHz (PC3-10600) with CL9 9-9-9 timings at 1.5V and present a 2Rx4 rank layout. This specific registered ECC configuration is required for the DL380 G6/G7 memory controller to initialise correctly. Standard unbuffered ECC or non-ECC DIMMs will not function in these servers.

Thermals and Power in Normal Use

Bare modules without heat spreaders rely on the server's directed airflow for cooling. At 1.5V the pair draws modest power consistent with DDR3 registered DIMMs. The system automatically clocks modules down to 1066MHz or 800MHz depending on the installed Xeon 55xx processor and population across the eighteen sockets.

Highlights

  • 16 GB dual-channel kit for HP ProLiant DL380 G6/G7
  • ECC registered DDR3-1333 with CL9 latency for data integrity
  • 2Rx4 organisation on major-brand chips for server stability
  • 5 V operation matches original ProLiant specifications
  • Lifetime repair or exchange warranty against manufacturing defects

Specifications

BrandComputer Memory Solutions
ModelCM10247210600ECCR2R4H
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP ProLiant DL380 G7, DL380 G6
Package Content2 Memory RAM Sticks

Questions about this item

What does the 1333 MHz rating mean once the kit is installed in a ProLiant DL380 G6 or G7?

The modules run at 1333 MHz when the memory controller and population allow; with certain Xeon 55xx CPUs or multiple ranks they automatically drop to 1066 MHz or 800 MHz as the chipset dictates.

How does the PC3-10600 DDR3 interface limit real-world throughput in these servers?

PC3-10600 defines the DDR3-1333 data rate; the chipset caps usable speed to 1066 MHz in the first triple-channel bank with quad-rank DIMMs and 800 MHz if a second bank is populated, leaving the third bank empty.

What physical slot and form factor does this 240-pin DDR3 registered DIMM need?

It fits a standard 240-pin DDR3 DIMM socket on the HP ProLiant DL380 G6 or G7 motherboard; no heat spreader is present, so clearance is minimal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.