We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 DIMMs, 240-pin, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM10247212800ECCNRDIMM2R8 16GB DDR3 1600 ECC memory upgrade

SKU CH-DER6-JFDP3

16 GB DDR3-1600 ECC kit with two 8 GB unregistered DIMMs for select Gigabyte servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • ECC protection guards server data integrity
  • 16 GB total capacity in a matched 2 x 8 GB kit
  • DDR3 1600 speed with CL11 timing for responsive throughput
  • 240-pin unregistered DIMM fits listed Gigabyte server boards
  • 5 V operation matches standard DDR3 voltage requirements

Targeted DDR3 ECC kit for specific Gigabyte servers

This 16 GB kit contains two 8 GB unregistered ECC DIMMs built for the Gigabyte GA-6UASL1, GA-6LXGH, GA-6LXGL and GA-6LXSV platforms. It delivers 1600 MHz speed with CL11 timing at 1.5 V. The modules use a 240-pin layout and 2Rx8 organisation. Buyers needing registered or load-reduced memory cannot use this kit.

DDR3 1600 bus and four-slot ceiling

The DDR3 1600 interface caps transfer rate at PC3-12800, so bandwidth cannot exceed that standard. The supported boards top out at 32 GB across four sockets, so adding this 16 GB kit leaves only two slots for any further expansion. Systems requiring higher memory speeds or capacities beyond 32 GB are limited by the platform, not the modules.

Verify exact board model and slot count

Confirm the motherboard is one of the four listed Gigabyte models before ordering; other boards are not guaranteed compatible. Check how many of the four DIMM slots are already populated to ensure two free slots exist for this pair. Ensure the system accepts unregistered ECC DIMMs, as registered variants will not work in these sockets.

Highlights

  • ECC protection guards server data integrity
  • 16 GB total capacity in a matched 2 x 8 GB kit
  • DDR3 1600 speed with CL11 timing for responsive throughput
  • 240-pin unregistered DIMM fits listed Gigabyte server boards
  • 5 V operation matches standard DDR3 voltage requirements

Specifications

BrandComputer Memory Solutions
ModelCM10247212800ECCNRDIMM2R8
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemGigabyte Ga-6Uasl1, Ga-6Lxgh, Ga-6Lxgl, Ga-6Lxsv
Package Content2 Memory RAM Sticks

Questions about this item

Should I buy the 16GB kit or add single 8GB modules to reach 32GB?

The 16GB kit provides two matched 8GB DDR3-1600 ECC DIMMs; using the paired kit ensures identical timing and voltage across both sticks for stable dual-channel operation.

What does the DDR3-1600 speed deliver in a Gigabyte GA-6UASL1 server?

At 1600 MHz with CL11 timing the modules run at the board's maximum supported memory frequency, giving the highest throughput the platform allows for ECC DDR3.

How does the 240-pin DDR3 interface limit capacity on this board?

Each 240-pin DDR3 slot accepts one 8GB DIMM; with four slots the GA-6UASL1 caps total memory at 32GB, so this 16GB kit fills half the available capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.