We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 DIMM sticks, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM2566410600DIMM1R8 4GB (2x2GB) DDR3 1333MHz memory upgrade

SKU CH-9703-AGAYP

4GB dual-channel DDR3-1333 kit (2×2GB, CL9, 1.5 V) validated for HP Business Desktop 4000 Pro, 500B and 505B series

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4GB dual-channel kit boosts multitasking on supported HP desktops
  • 1333 MHz DDR3 speed matches system bus for stable operation
  • CL9 9-9-9 timing at 1.5 V delivers responsive performance
  • 240-pin unbuffered non-ECC DIMMs install directly in 4000 Pro, 500B, 505B series
  • Two 2 GB modules enable dual-channel bandwidth on four-slot motherboards

4GB DDR3 kit for HP business desktops

This 4GB kit contains two 2GB unbuffered DIMMs rated at DDR3 1333 (PC3 10600) with CL9 timing and 1.5V operation. It is built for HP and Compaq Business Desktop 4000 Pro, 500B, 505B and related series that use 240-pin DDR3 memory.

Tool-free DIMM installation in matched pairs

The modules slot into standard 240-pin DDR3 sockets without cables or screws. The system has four sockets and the manufacturer notes that modules must be added in like pairs to enable dual-channel operation; mixing capacities or speeds can prevent the expected bandwidth gain.

Check your model, OS and socket count before buying

Confirm your desktop appears in the supported list such as 4000 Pro, 500B, 505B, 6000 Pro, 6005 Pro, 6200 Pro, dx7510 or Pro 2000. A 64-bit operating system is required to address the full 4GB, and the memory bus runs at 1066MHz even with 1333MHz modules installed.

Highlights

  • 4GB dual-channel kit boosts multitasking on supported HP desktops
  • 1333 MHz DDR3 speed matches system bus for stable operation
  • CL9 9-9-9 timing at 1.5 V delivers responsive performance
  • 240-pin unbuffered non-ECC DIMMs install directly in 4000 Pro, 500B, 505B series
  • Two 2 GB modules enable dual-channel bandwidth on four-slot motherboards

Specifications

BrandComputer Memory Solutions
ModelCM2566410600DIMM1R8
Capacity4GB (2 x 2GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Business Desktop 4000 Pro, 500B, 505B Series
Package Content2 Memory RAM Sticks

Questions about this item

How do I confirm the kit is running at 1333 MHz with CL9 timings after installation?

Open the BIOS or a system information utility and verify the memory speed reads 1333 MHz and the timings show 9-9-9; the modules operate at 1.5 V and are unbuffered non-ECC, so the firmware should detect them automatically.

What exactly is included in the package and is anything else required?

The box contains two 2 GB DDR3 240-pin DIMM sticks for a total of 4 GB; no additional cables, brackets or software are needed — just insert them into the motherboard slots.

Should I choose this 4 GB kit or add another kit to reach the 8 GB maximum?

The supported desktops accept up to 8 GB across four slots; installing two more identical 2 GB modules in the remaining slots will enable full dual-channel operation and reach the 8 GB limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.