Computer Memory Solutions
Computer Memory Solutions CM256644200DIMMDR 2GB DDR2 533MHz 240-pin DIMM memory upgrade
A 2 GB DDR2 533 MHz 240-pin DIMM module for Dell OptiPlex GX520 desktops
- Capacity64MB
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 533 (PC2 4200)
- CAS LatencyCL4
- Timing4-4-4
- Voltage1.8V
- Designed for Dell OptiPlex GX520 systems
- 2GB DDR2 533MHz module expands capacity
- CL4 timing at 1.8V for stable operation
- Unbuffered non-ECC 240-pin DIMM format
- Major-brand chipset with lifetime warranty backing
Dell OptiPlex GX520 memory upgrade
This 240-pin DDR2 module delivers 2 GB of system-specific memory for the Dell OptiPlex GX520 series desktop. It operates at 533 MHz (PC2-4200) with CL4 timing and 1.8 V voltage. The unbuffered, non-ECC stick uses a 2Rx8 rank configuration with major brand chips. It installs directly into one of the two available DIMM sockets.
Suited for restoring or maintaining a GX520
This upgrade suits owners of a Dell OptiPlex GX520 needing to replace a failed stick or reach the 4 GB platform maximum. The single-module kit fills one slot and is guaranteed compatible by the manufacturer. Builders requiring ECC error correction, registered buffering or speeds beyond DDR2-533 should look at other memory types. The lack of a heat spreader also makes it unsuitable for overclocked configurations.
DDR2-533 (PC2-4200) speed grade
The decisive specification is the DDR2-533 (PC2-4200) rating with CL4 4-4-4 timing. The motherboard must support this exact speed and voltage combination for the module to function. Verify that the target system accepts 240-pin unbuffered non-ECC DIMMs at 1.8 V before purchase. Mismatched speed or voltage will prevent the computer from booting.
Highlights
- Designed for Dell OptiPlex GX520 systems
- 2GB DDR2 533MHz module expands capacity
- CL4 timing at 1.8V for stable operation
- Unbuffered non-ECC 240-pin DIMM format
- Major-brand chipset with lifetime warranty backing
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM256644200DIMMDR |
| Capacity | 64MB |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 533 (PC2 4200) |
| CAS Latency | CL4 |
| Timing | 4-4-4 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Optiplex Gx520 Series Desktop |
| Package Content | 1 Memory RAM Stick |
Questions about this item
Does the 1.8 V DDR2 module run hot or draw much power when the Dell OptiPlex GX520 is on all day?
Standard DDR2 at 1.8 V is low-power and passively cooled; the stick has no heat spreader, so case airflow is all it needs for continuous operation.
What must the Dell OptiPlex GX520 already have for this 240-pin DIMM to work?
The GX520 needs a free 240-pin DDR2 slot and a BIOS that accepts 533 MHz CL4 unbuffered non-ECC memory; the system ships with two such sockets.
Will this 533 MHz CL4 stick run correctly beside the original 4200-speed memory in my GX520?
Yes — the module matches the PC2-4200 533 MHz CL4 spec of the factory DIMMs, so both sticks will operate at the same speed and timings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



