We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

Computer Memory Solutions

Computer Memory Solutions CM5126410600SODRH 4GB DDR3 1333 SODIMM HP Omni 120-1034 QW680AA

SKU CH-Y42K-3XJ10

A 4 GB DDR3 SODIMM module rated at 1333 MHz and CL7 latency, built for the HP Omni 120-1034 all-in-one desktop

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 4GB capacity expands multitasking headroom on HP Omni 120-1034
  • DDR3 1333 speed matches PC3-10600 system specification
  • CL7 latency delivers responsive memory access
  • 5V unbuffered design fits factory voltage and slot requirements
  • 204-pin SODIMM form factor installs directly into the two 200-pin sockets

System-Specific 4 GB DDR3 SODIMM

This 4 GB DDR3 SO-DIMM module is built for the HP Omni 120-1034 all-in-one desktop. It delivers a straightforward memory upgrade for owners of that model who need more capacity for everyday tasks. The part is new and tested for the specified system.

1333 MHz PC3-10600 speed rating

The module runs at DDR3 1333 MHz with a PC3-10600 designation and CL7 7-7-7 timings at 1.5 V. That exact speed grade is the deciding factor; the board accepts PC3-8500 (1066 MHz) and PC3-10600 (1333 MHz) non-ECC unbuffered SODIMMs only.

Single 204-pin stick in the package

The box contains one 204-pin DDR3 SO-DIMM with no heat spreader. No software, cables or additional brackets are included. The module simply plugs into one of the two SO-DIMM sockets to add 4 GB of capacity.

Highlights

  • 4GB capacity expands multitasking headroom on HP Omni 120-1034
  • DDR3 1333 speed matches PC3-10600 system specification
  • CL7 latency delivers responsive memory access
  • 5V unbuffered design fits factory voltage and slot requirements
  • 204-pin SODIMM form factor installs directly into the two 200-pin sockets

Specifications

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Omni 120-1034 Desktop Pc All-In-One Qw680Aa
Package Content1 Memory RAM Stick

Questions about this item

What does the 1333 MHz rating mean once this module is installed in the HP Omni 120-1034?

The system runs the memory at 1066 MHz because the board only supports PC3-8500 speeds, so the 1333 MHz rating will not be reached.

What interface does this SODIMM use and what speed does the HP Omni 120-1034 actually allow?

It uses a 204-pin DDR3 SO-DIMM interface, but the Omni 120-1034 caps memory at PC3-8500 (1066 MHz) despite the module's PC3-10600 rating.

Will the 204-pin stick fit the two memory sockets in the HP Omni 120-1034 all-in-one?

Yes, the board has two 200-pin DDR3 SO-DIMM sockets and this 204-pin module is the correct form factor for those slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.