We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM5126410600SODRH 4GB DDR3 1333MHz SODIMM for HP Compaq 2000-2B09Wm memory upgrade

SKU CH-S2P6-EFPMA

4GB DDR3 1333MHz SODIMM module upgrades HP Compaq 2000-2B09Wm notebooks with CL7 timing at 1.5V

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 4GB capacity expands multitasking headroom for everyday workloads
  • DDR3 1333MHz speed matches the notebook’s supported memory bus
  • CL7 7-7-7 timings deliver low-latency data access
  • 204-pin SODIMM form factor fits the HP Compaq 2000-2B09Wm slot directly
  • 5V unbuffered non-ECC design meets the system’s voltage and signalling requirements

System Specific 4GB DDR3 SODIMM

This module is a 4GB DDR3 SODIMM built to HP Compaq 2000-2B09Wm specifications. It installs directly into the notebook's 204-pin slot and runs at 1333MHz with CL7 timings. The stick is unbuffered, non-ECC and operates at 1.5V.

Ideal for Single-Slot Capacity Boost

Owners of the 2000-2B09Wm needing a straightforward 4GB upgrade will find this module matches the documented DDR3-1333 and DDR3-1066 support. Buyers requiring 8GB total capacity should look elsewhere because this kit provides only one 4GB stick and the platform has two sockets.

1333MHz DDR3 Speed Rating

The decisive specification is the DDR3-1333 (PC3-10600) speed grade with CL7 latency. HP documentation notes the memory bus may run at 1066MHz depending on the processor, so this module covers both supported speeds.

Highlights

  • 4GB capacity expands multitasking headroom for everyday workloads
  • DDR3 1333MHz speed matches the notebook’s supported memory bus
  • CL7 7-7-7 timings deliver low-latency data access
  • 204-pin SODIMM form factor fits the HP Compaq 2000-2B09Wm slot directly
  • 5V unbuffered non-ECC design meets the system’s voltage and signalling requirements

Specifications

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq 2000-2B09Wm Notebook
Package Content1 Memory RAM Stick

Questions about this item

How much power does the 1.5V DDR3 SODIMM draw when the notebook runs all day?

The module operates at 1.5V; DDR3 at this voltage typically draws only a few watts under load, so heat and battery impact are minimal in the HP 2000-2B09Wm.

What must the HP 2000-2B09Wm already have for this 204-pin SODIMM to work?

The notebook needs a free DDR3 SO-DIMM slot and a 64-bit operating system to address the full 4GB; a 32-bit OS will limit usable memory to 3.5GB.

Will this PC3-10600 stick run at 1333MHz alongside an existing 1066MHz module in the second socket?

Yes, the system bus will drop both modules to 1066MHz (PC3-8500) when mixed speeds are installed, per HP documentation for this model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.