We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips and gold edge connectors

Computer Memory Solutions

Computer Memory Solutions CM5126410600SODRH 8GB (2x4GB) DDR3 1333MHz for Dell Inspiron One 2310 memory upgrade

SKU CH-J79Y-AFPE1

An 8 GB DDR3 SO-DIMM kit (2 × 4 GB, 1333 MHz, CL7, 1.5 V) validated for the Dell Inspiron One 2310

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8 GB kit enables dual-channel performance on Dell Inspiron One 2310
  • 1333 MHz DDR3 speed matches factory specification for stable operation
  • CL7 latency at 1.5 V reduces access delay for responsive multitasking
  • Two 4 GB modules fill both slots for maximum supported capacity
  • 204-pin SO-DIMM form factor fits notebook memory sockets directly

8GB DDR3 SO-DIMM Kit for Dell Inspiron One 2310

This 8GB kit contains two 4GB DDR3 SO-DIMM modules rated at 1333MHz with CL7 timing. It is built specifically for the Dell Inspiron One 2310 all-in-one desktop. The unbuffered, non-ECC design matches the original system requirements exactly.

204-pin unbuffered modules at 1.5V

Each stick uses a standard 204-pin SO-DIMM edge connector and operates at 1.5 volts. The modules have no heat spreader, keeping the profile low for the tight chassis of the Inspiron One 2310. Major-brand DRAM chips are used throughout the kit.

Replaces factory 4GB or 6GB configurations

The system supports a maximum of 8GB across its two slots, and modules must be installed in matched pairs for dual-channel operation. A 64-bit operating system is required to address the full capacity. Buyers whose OS remains 32-bit will not see the full 8GB.

Highlights

  • 8 GB kit enables dual-channel performance on Dell Inspiron One 2310
  • 1333 MHz DDR3 speed matches factory specification for stable operation
  • CL7 latency at 1.5 V reduces access delay for responsive multitasking
  • Two 4 GB modules fill both slots for maximum supported capacity
  • 204-pin SO-DIMM form factor fits notebook memory sockets directly

Specifications

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Inspiron One 2310 Notebooks
Package Content2 Memory RAM Sticks

Questions about this item

What speed does the DDR3 1333 MHz interface cap at in practice?

The kit runs at DDR3-1333 (PC3-10600) with CL7 timing at 1.5V, delivering the rated bandwidth for the Dell Inspiron One 2310.

What physical slot and form factor do the modules need to fit the Inspiron One 2310?

Each module is a 204-pin DDR3 SO-DIMM; the system has two sockets and the pair must occupy both for dual-channel operation.

How is the memory installed, and which step do people often get wrong?

Power off, open the access panel, insert both 4 GB sticks firmly until the clips lock — installing only one module or mixing capacities breaks the required paired configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.