SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00502448BTC
In stock
Computer Memory Solutions
Computer Memory Solutions CM512646400SO 4GB DDR2 800 SODIMM
4GB DDR2 800 SODIMM module for HP/Compaq 8510P, 8710P, 2510P and 6715B notebooks
- Capacity4GB
- Type200-Pin DDR2 SO-DIMM
- SpeedDDR2 800 (PC2 6400)
- CAS LatencyCL6
- Timing6-6-6
- Voltage1.8V
- 4 GB capacity for demanding legacy workloads
- DDR2 800 MHz speed matches PC2-6400 spec
- CL6 6-6-6 timings keep latency low
- 8 V unbuffered design fits standard notebook slots
- Validated for HP 8510P, 8710P, 2510P, 6715B
Capacity and fit
This 4 GB DDR2 SODIMM uses the 200-pin form factor and runs at 800 MHz with CL6 timings. It is built for HP and Compaq business notebooks including the 8510P, 8710P, 2510P and 6715B models where a single unbuffered non-ECC module is required.
Sustained operation
The module operates at the standard 1.8 V without a heat spreader, relying on the notebook’s internal airflow for cooling during extended workloads. Unbuffered 2Rx8 organisation keeps electrical loading low so the memory controller can maintain stability across long sessions.
Platform limits
DDR2 architecture caps the memory bus at 800 MHz, so bandwidth cannot exceed the PC2 6400 rating even if the chipset supports higher clocks. The notebook’s two SODIMM sockets top out at 8 GB total, meaning this 4 GB stick fills half the maximum addressable space.
Highlights
- 4 GB capacity for demanding legacy workloads
- DDR2 800 MHz speed matches PC2-6400 spec
- CL6 6-6-6 timings keep latency low
- 8 V unbuffered design fits standard notebook slots
- Validated for HP 8510P, 8710P, 2510P, 6715B
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512646400SO |
| Capacity | 4GB |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Timing | 6-6-6 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp Business Notebook 8510P, 8710P, 2510P, 6715B |
| Package Content | 1 Memory RAM Stick |
Questions about this item
How much power does the 1.8 V DDR2-800 SODIMM draw during continuous use?
The module runs at 1.8 V, the standard voltage for DDR2 SODIMMs, so power draw is low and typical for this memory class.
What must the notebook provide for this 200-pin DDR2 SODIMM to function?
A free 200-pin DDR2 SO-DIMM slot and a BIOS that accepts 4 GB unbuffered non-ECC modules at 800 MHz.
Will this 800 MHz stick run reliably in an HP 2510p or 6715b specified for 667 MHz memory?
Yes, the 800 MHz module will down-clock to 667 MHz and operate normally in those models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
