We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 360 mm radiator with three 120 mm ARGB fans and dual-chamber pump block showing 30th anniversary logo

Cooler Master

Cooler Master MasterLiquid PL360 FLUX 30th Edition liquid cooler

SKU CH-H9BZ-JCERN

A 360 mm liquid cooler with a dual-chamber pump, three 120 mm ARGB fans and a slim aluminium radiator for AM5 and LGA 1700 CPUs

  • TypeLiquid Cooling System
  • Pump Dim.89*75*40mm
  • Pump Noise15dB(A)
  • Radiator Size394*119.6*27.2mm
  • Radiator MaterialAluminum
  • Fan Size3 Fan Slots (120 mm)
  • 360 mm radiator surface handles heavy CPU loads
  • dual-chamber pump balances flow and pressure at 15 dB(A)
  • three Mobius 120P fans push 75.2 CFM up to 2400 RPM
  • addressable Gen 2 ARGB lighting syncs across pump and fans
  • supports AMD Ryzen AM5/AM4 and Intel LGA1700/1200 sockets

Dual chamber pump for precise CPU cooling

The Cooler Master MasterLiquid PL360 FLUX 30th Edition is a closed-loop liquid cooler built around a Gen2 dual chamber pump that balances flow and pressure to target CPU hot spots. It mounts on AMD Ryzen AM5 and AM4 platforms as well as Intel LGA1700 and LGA1200 sockets. The 30th Anniversary edition adds exclusive ARGB lighting on the pump and fans for builders who want coordinated illumination.

360 mm radiator handles high thermal loads

A 394 mm aluminium radiator with dense fins pairs with three 120 mm Mobius 120P fans spinning up to 2400 rpm to deliver 75.2 CFM airflow. This combination dissipates heat rapidly from overclocked or sustained workloads. It will run out of headroom only under extreme multi-core loads that exceed the radiator’s surface-area capacity or when case airflow cannot feed the fans cool intake air.

Quiet operation with low pump noise

The pump runs at 15 dB(A) while the fans peak at 30 dB(A), keeping acoustic output low during typical gaming or productivity sessions. 4-pin PWM control lets the system scale fan speed to actual temperature rather than running at constant maximum. The slim 27.2 mm radiator profile fits most modern cases without forcing high static-pressure operation that would raise noise further.

Highlights

  • 360 mm radiator surface handles heavy CPU loads
  • dual-chamber pump balances flow and pressure at 15 dB(A)
  • three Mobius 120P fans push 75.2 CFM up to 2400 RPM
  • addressable Gen 2 ARGB lighting syncs across pump and fans
  • supports AMD Ryzen AM5/AM4 and Intel LGA1700/1200 sockets

Specifications

Series360
TypeLiquid Cooling System
Pump Dim.89*75*40mm
Pump Noise15dB(A)
Radiator Size394*119.6*27.2mm
Radiator MaterialAluminum
Fan Size3 Fan Slots (120 mm)
Fan Dim.120mm
Fan RPM0-2400
Fan Air Flow75.2CFM
Fan Noise30dB(A)
Fan Connector4 Pin
ColorBlack
LED ColorARGB

Questions about this item

Will the 360 mm radiator and 120 mm fans fit inside a mid-tower case that already holds a full-length graphics card?

The radiator measures 394 mm long by 119.6 mm wide and 27.2 mm thick, so verify your case supports a 360 mm top or front mount with at least 27 mm clearance above the motherboard.

How can I confirm the Gen2 ARGB dual-loop pump and the three Mobius 120P fans are running correctly after installation?

Connect the pump’s 4-pin header to the CPU_FAN socket and the fan cables to SYS_FAN headers; then watch for pump speeds near 2400 RPM and fan speeds up to 2400 RPM in BIOS or monitoring software while the ARGB lighting cycles through the Addressable Gen 2 controller.

Which mounting brackets and thermal compound are included, and what must I supply separately?

The box contains brackets for AMD Ryzen AM5, AM4 and Intel LGA 1700, 1200, 1151, 1150, 1155, 1156, 1366, 2066, 2011-v3 and 2011 sockets plus pre-applied paste on the copper base; you only need to provide a 4-pin fan header for each fan and a 5 V ARGB header for the lighting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.