We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Corn Electronics

Corn Electronics 360 liquid cooler Black 395mm radiator 120mm fans 1800 RPM ARGB

SKU CH-AF6F-K61EF

A 360 mm liquid cooler with a 395 mm radiator, three 120 mm fans at 1800 RPM, ARGB lighting and a copper cold plate for Intel and AMD sockets

  • TypeLiquid Cooling System
  • Block Compatibility - AMDAM4/AM3+/AM3/AM2+/FM2+/FM2/FM1
  • Block Compatibility - IntelLGA2066/2011-V3/2011/1151/1150/1155/1156/1366/775
  • Block MaterialCopper & Acrylic
  • Pump Noise29.5 dbA
  • Radiator Size395 X 120 X 27 mm
  • 395 mm radiator provides high heat capacity for sustained loads
  • Pump runs at 2300 RPM with 29.5 dBA noise for quiet circulation
  • Three 120 mm fans deliver 67 CFM each at 1800 RPM
  • ARGB lighting synchronises across the loop via 5 V 3-pin connector
  • Copper cold plate and Teflon tubing support Intel and AMD platforms

360 mm liquid cooler with ARGB lighting

The Corn Electronics 360 liquid cooler is an all-in-one water cooling system built around a 395 mm aluminium radiator and three 120 mm fans. A copper-and-acrylic cold plate transfers heat into Teflon tubing while addressable RGB illumination runs along the block and fans. Hydraulic-bearing fans spin at 1800 RPM to deliver 67 CFM of airflow at a listed 29 dBA. The pump operates at 2300 RPM with a noise rating of 29.5 dBA.

Suits builders with legacy Intel or AMD sockets

This unit fits Intel LGA 2066, 2011-v3, 2011, 1151, 1150, 1155, 1156, 1366 and 775 as well as AMD AM4, AM3+, AM3, AM2+, FM2+, FM2 and FM1. It is not for builders who require mounting hardware for sockets outside that list.

395 mm radiator length determines case fit

The radiator measures 395 mm long by 120 mm wide by 27 mm thick, so the chassis must accommodate a 360 mm triple-fan layout with at least 27 mm of radiator depth plus fan clearance.

Highlights

  • 395 mm radiator provides high heat capacity for sustained loads
  • Pump runs at 2300 RPM with 29.5 dBA noise for quiet circulation
  • Three 120 mm fans deliver 67 CFM each at 1800 RPM
  • ARGB lighting synchronises across the loop via 5 V 3-pin connector
  • Copper cold plate and Teflon tubing support Intel and AMD platforms

Specifications

SeriesN/A
TypeLiquid Cooling System
Block Compatibility - AMDAM4/AM3+/AM3/AM2+/FM2+/FM2/FM1
Block Compatibility - IntelLGA2066/2011-V3/2011/1151/1150/1155/1156/1366/775
Block MaterialCopper & Acrylic
Pump Noise29.5 dbA
Radiator Size395 X 120 X 27 mm
Radiator MaterialAluminum
Fan Size3 Fan Slots (120 mm)
Fan Dim.120×120X25 MM
Bearing TypeHydraulic Bearings
Fan RPM1800 RPM±10%
Fan Air Flow67CFM
Fan Noise29 dbA
Fan Connector5V/3PIN
ColorBlack
LED ColorARGB
Tube MaterialTeflon

Questions about this item

Will the 395 mm radiator and 120 mm fans fit in my existing case alongside older components?

The radiator measures 395 × 120 × 27 mm and uses three 120 mm fan slots, so check your case for a 360 mm top or front mount with 27 mm clearance.

How can I confirm the pump and fans are running correctly after installation?

The pump runs at 2300 RPM and fans at 1800 RPM; monitor those speeds and the 29.5 dBA pump noise in your BIOS or fan-control software.

Which mounting brackets and cables are included, and what must I source separately?

The box contains the radiator, three 120 mm fans, pump block with Intel LGA2066/2011/115x/1366/775 and AMD AM4/AM3/FM brackets, plus 5 V 3-pin ARGB and pump cables.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.