We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pink 360 mm AIO radiator with three 120 mm fans and ARGB pump block

Corn Electronics

Corn Electronics ICEMOON 360 liquid cooler pink

SKU CH-TJ4G-K16R7

A 360 mm liquid CPU cooler with three 120 mm hydraulic-bearing fans, ARGB lighting and a copper cold plate supporting Intel and AMD sockets

  • TypeLiquid Cooling System
  • Block Compatibility - AMDAMD AM4/AM3+/AM2+/FM2+/FM1
  • Block Compatibility - IntelIntel 115X/1200/1366/17xx/20xx
  • Block MaterialCopper & Acrylic
  • Radiator SizeWater cooled sizes 394 × 120 × 52 mm
  • Radiator MaterialCopper
  • 5V ARGB motherboard sync for unified lighting
  • Intelligent temperature control keeps fan noise down to 29.5 dBA
  • Pure copper base transfers heat efficiently from the CPU
  • High-density E-shaped fins increase radiator surface area
  • Flexible sealed tubing allows easy routing in tight cases

Pink 360 mm liquid cooler

The Corn Electronics ICEMOON 360 is an all-in-one liquid cooler with a 394 mm radiator, three 120 mm fans and a copper cold plate. It targets builders who want a pink-themed ARGB loop that fits standard 360 mm mounting points. The pump runs at up to 2600 RPM and moves coolant at 1100 ml/min.

Suits pink-theme ARGB builds; not for smaller cases

This cooler suits systems that can accommodate a 394 × 120 × 52 mm radiator and three 120 mm fan slots. It supports Intel sockets 115x, 1200, 1366, 17xx and 20xx plus AMD AM4, AM3+, AM2+, FM2+ and FM1. Builders with limited radiator clearance or without a 5 V ARGB header should look elsewhere.

Radiator dimensions decide fit

The radiator measures 394 × 120 × 52 mm, so the case must provide a 360 mm mounting grid with that exact thickness and length. If the available space is shorter, thinner or uses a different hole pattern, the cooler cannot be installed.

Highlights

  • 5V ARGB motherboard sync for unified lighting
  • Intelligent temperature control keeps fan noise down to 29.5 dBA
  • Pure copper base transfers heat efficiently from the CPU
  • High-density E-shaped fins increase radiator surface area
  • Flexible sealed tubing allows easy routing in tight cases

Specifications

SeriesN/A
TypeLiquid Cooling System
Block Compatibility - AMDAMD AM4/AM3+/AM2+/FM2+/FM1
Block Compatibility - IntelIntel 115X/1200/1366/17xx/20xx
Block MaterialCopper & Acrylic
Radiator SizeWater cooled sizes 394 × 120 × 52 mm
Radiator MaterialCopper
Fan Size3 Fan Slots (120 mm)
Bearing TypeHydraulic bearing
Fan RPM800 ~ 2000 RPM ± 10%
Fan Air Flow71 ± 10% CFM
Fan Noise=29.5dba (MAX)
Fan Connector3pin ARGB + 4pin PMW
ColorPink
LED ColorARGB

Questions about this item

How loud does the 29.5 dB(A) maximum fan noise and 25 dB(A) pump noise become during all-day use?

The three 120 mm fans top out at 29.5 dB(A) and the pump at 25 dB(A), both at their highest 2000 RPM and 2600 RPM speeds; intelligent temperature control lowers speeds when the CPU is idle, so typical noise stays below those peaks.

Does my motherboard need a 3-pin 5 V ARGB header and a 4-pin PWM header to run the lighting and fan control?

Yes — the cooler connects with a 3-pin ARGB cable for motherboard synchronised lighting and a 4-pin PWM cable for automatic fan-speed regulation.

Will the 394 mm long radiator and three 120 mm fan slots fit in a case designed for a standard 360 mm radiator?

The radiator measures 394 × 120 × 52 mm and uses three 120 mm fan slots, matching the typical 360 mm mounting pattern; verify your case clearance for the 394 mm length and 52 mm thickness before installing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.