BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Corn Electronics
Displays four-digit POST codes and power-rail status on PCI or ISA slots for motherboard fault diagnosis
The Corn Electronics PCI PC Diagnostic Analyzer is a four-digit POST card that plugs into a PCI or ISA slot to reveal motherboard power-on self-test codes. It targets technicians and hobbyists who need to identify boot failures on legacy or current boards without a working display. The dual hexadecimal read-out shows status codes from both component and solder sides of the card. Buyers who want automated Windows-based diagnostics or UEFI log capture will not find those functions here.
The package includes a single signal cable that extends the display away from the expansion slot for easier viewing inside cramped chassis. An on-board speaker adds audible beep codes so faults can be recognised without watching the LEDs. Four power-rail LEDs confirm the presence of +5 V, +12 V and +3.3 V lines, letting the user verify supply health at a glance. No software, drivers or additional adapters are supplied.
The card measures 85 by 90 mm and fits any motherboard with a PCI or ISA connector; no jumpers or configuration are required. Pressing the recall button cycles through previously captured POST codes for retrospective analysis. The only common issue is physical clearance against tall CPU coolers or adjacent cards, which may block the display or the cable header.
No published specifications for this item yet.
The card uses a dual dot-matrix hexadecimal read-out and an integrated speaker for beep codes; both are solid-state with no moving parts, so no scheduled replacement is required.
Four onboard LEDs monitor +5 V, +12 V, +3.3 V and 12 V rails; the LED for the faulty rail stays dark while the others remain lit, pinpointing the failed supply instantly.
The analyzer draws power only from the PCI or ISA slot it occupies and has no active cooling, so its thermal contribution is negligible during continuous operation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?