Corsair CMW16GX4M2D3000C16 Vengeance RGB Pro 16GB DDR4 3000 CL16 desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Corsair
16GB dual-channel DDR4 kit running at 3000MHz CL15 with 10 RGB LEDs per module and iCUE sync
Capacity 16GB (2 x 8GB)
Speed DDR4 3000 (PC4 24000)
CAS Latency|Color CL15|Black
This 16 GB kit contains two 8 GB DDR4 modules rated at 3000 MHz with CL15 timings. It targets enthusiasts who want RGB lighting and XMP 2.0 simplicity on modern desktop platforms. The anodized aluminum heat spreader is finished in black.
The memory operates at the DDR4 3000 data rate with a 1.35 V requirement. Your motherboard and CPU memory controller must support this frequency and voltage for stable operation. XMP 2.0 applies the rated timings of 15-17-17-35 with a single BIOS setting.
The CAS latency of 15 cycles at 3000 MHz determines how quickly the kit can start a read or write operation. Lower latency at this speed improves frame-time consistency in games and throughput in latency-sensitive workloads. Verify that your platform can run CL15 at the rated frequency before purchasing.
| Brand | CORSAIR |
|---|---|
| Series | Vengeance RGB Pro |
| Model | CMW16GX4M2C3000C15 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3000 (PC4 24000) |
| CAS Latency | CL15 |
| Timing | 15-17-17-35 |
| Voltage | 1.35V |
| Color | Black |
| Heat Spreader | Anodized Aluminum |
| Features | Dynamic Multi-Zone RGB Lighting 10 Ultra-bright RGB LEDs per module. Next Generation Software Take control in CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products, including CPU coolers, keyboards and fans. Custom Performance PCB Provides the highest signal quality for the greatest level of performance and stability. Tightly Screened Memory Carefully screened ICs for extended overclocking potential. Maximum Bandwidth and Tight Response Times Optimized for peak performance on the latest Intel and AMD DDR4 motherboards. No Wires Required Requires no extra wire |
| Recommend Use | AMD & Intel Compatible / AMD 300 Series / AMD 400 Series / AMD 500 Series / AMD TRX40 / Intel 300 Series / Intel 400 Series |
| LED Color | RGB |
| Shipping weight | 0.17 kg |
| Package size | 163 × 130 × 10 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
This kit provides 16GB in two 8GB modules running at 3000MHz with CL15 timings and 1.35V. If your board has four slots, the 2x8GB layout leaves room to add another identical kit later without mixing densities.
With XMP 2.0 enabled in the BIOS, the modules run at 3000MHz with 15-17-17-35 timings at 1.35V, giving lower latency than standard 3000MHz CL16 kits. The custom PCB and screened ICs help sustain those speeds under load.
The 288-pin DDR4 form factor carries the 3000MHz (PC4-24000) signal. Your motherboard must support DDR4-3000 and XMP 2.0; if it only validates lower speeds, the kit will downclock to the highest supported JEDEC or XMP profile.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?