Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Corsair
64 GB dual-channel DDR4 kit at 3200 MT/s with CL16 timings, 1.35 V operation, Intel XMP 2.0 support and per-module 10-zone RGB lighting controlled via iCUE software
This Corsair kit delivers 64GB of DDR4 memory across two 32GB modules rated at 3200 MT/s with CL16 timings. Anodized aluminum heat spreaders and ten addressable RGB LEDs per module provide both cooling and lighting control through iCUE software. The set targets desktop builders who want high capacity and synchronized illumination without extra cabling.
The 2 x 32GB layout suits content creators and multitaskers who need 64GB on a four-slot board while leaving two slots free for future expansion. Intel XMP 2.0 support enables a one-click profile at 1.35V on compatible 300, 400 and 500 series chipsets as well as AMD 300, 400, 500 and TRX40 platforms. Builders needing higher frequencies, lower latencies or non-RGB modules should evaluate other kits.
Each 32GB stick uses a dual-rank architecture that increases memory controller load compared to single-rank 16GB alternatives. Some consumer motherboards limit maximum speed or stability when all four slots are populated with dual-rank modules. Verify the motherboard’s qualified vendor list for 64GB dual-rank support before purchasing.
| Brand | CORSAIR |
|---|---|
| Series | Vengeance RGB Pro |
| Model | CMW64GX4M2E3200C16 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL16 |
| Timing | 16-20-20-38 |
| Voltage | 1.35V |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Anodized Aluminum |
| Features | Dynamic Multi-Zone RGB Lighting 10 Ultra-bright RGB LEDs per module. Next Generation Software Take control in CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products, including CPU coolers, keyboards and fans. Custom Performance PCB Provides the highest signal quality for the greatest level of performance and stability. Tightly Screened Memory Carefully screened ICs for extended overclocking potential. Maximum Bandwidth and Tight Response Times Optimized for peak performance on the latest Intel and AMD DDR4 motherboards. No Wires Required Requires no extra wire |
| Recommend Use | AMD & Intel Compatible / AMD 300 Series / AMD 400 Series / AMD 500 Series / AMD TRX40 / Intel 300 Series / Intel 400 Series |
| LED Color | RGB |
| Shipping weight | 0.16 kg |
| Package size | 165 × 132 × 15 mm |
The Vengeance RGB Pro modules use a 288-pin DDR4 form factor with anodized aluminum heat spreaders; verify your cooler’s published RAM clearance against the module height before installing.
Enter the BIOS, enable the Intel XMP 2.0 profile for this kit, save and exit; the board will then configure 3200 MT/s, CL16, 16-20-20-38 at 1.35 V automatically.
No extra wires are required; the 10 ultra-bright RGB LEDs per module draw power and control data through the DIMM slot and are managed in CORSAIR iCUE software.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?