We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black all-in-one liquid cooler with 396 mm radiator, three 120 mm fans and black sleeved tubes

Corsair

Corsair CW-9060089-WW Nautilus 360 RS liquid cooler

SKU CH-E9TC-8ZEKV MPN CW-9060089-WW

A 360 mm all-in-one liquid CPU cooler with three 120 mm magnetic-dome-bearing fans, aluminium radiator, low-permeation sleeved tubing and pre-applied thermal paste for Intel LGA 1851/1700

  • TypeAIO
  • Block CompatibilityIntel® LGA 1851/1700, AMD® AM5/AM4
  • Block Compatibility - AMDAMD® AM5/AM4
  • Block Compatibility - IntelIntel® LGA 1851/1700
  • Radiator Size396 mm
  • Radiator MaterialAluminum
  • Quiet operation at just 20 dBA pump noise
  • Strong airflow up to 72.8 CFM from three RS120 fans
  • Broad socket support for Intel LGA 1851/1700 and AMD AM5/AM4
  • Faster install with pre-applied thermal paste on convex cold plate
  • Low-maintenance reliability from 450 mm low-permeation rubber tubing

Nautilus 360 RS all-in-one cooler

The Corsair Nautilus 360 RS is a 360 mm all-in-one liquid cooler built for modern Intel LGA 1851 and 1700 platforms as well as AMD AM5 and AM4 sockets. It uses a convex cold plate with pre-applied thermal paste to speed up installation. Three RS120 fans with Magnetic Dome bearings move between 13.3 and 72.8 CFM at 0 to 2,100 RPM. The pump runs at a quiet 20 dBA while maintaining high flow through the aluminum radiator.

Upgrade from stock or compact coolers

Builders replacing a stock air cooler or a 120 mm AIO will notice lower CPU temperatures and reduced noise when the fans spin up to 36 dBA. The jump is worth it when sustained workloads push a smaller cooler into thermal throttling or when the system needs quieter operation at idle. The daisy-chain fan wiring and direct motherboard connection simplify the swap without extra controllers.

396 mm radiator capacity and limits

The 396 mm radiator with 450 mm low-permeation rubber tubes handles high-TDP processors under prolonged loads while keeping fan speeds in the lower half of their range. Headroom shrinks in cases that cannot fit a 396 mm radiator or where clearance blocks the 120 mm fan slots. Buyers who need more surface area than a triple-fan layout provides will have to look beyond this form factor.

Highlights

  • Quiet operation at just 20 dBA pump noise
  • Strong airflow up to 72.8 CFM from three RS120 fans
  • Broad socket support for Intel LGA 1851/1700 and AMD AM5/AM4
  • Faster install with pre-applied thermal paste on convex cold plate
  • Low-maintenance reliability from 450 mm low-permeation rubber tubing

Specifications

BrandCORSAIR
SeriesNautilus Series
TypeAIO
Block CompatibilityIntel® LGA 1851/1700, AMD® AM5/AM4
Block Compatibility - AMDAMD® AM5/AM4
Block Compatibility - IntelIntel® LGA 1851/1700
Radiator Size396 mm
Radiator MaterialAluminum
Fan Size3 Fan Slots (120 mm)
Fan Dim.120mm x 25mm
Bearing TypeMagnetic Dome
Fan RPM0 – 2,100 RPM ±10%
Fan Air Flow13.3 – 72.8 CFM
Fan Noise10 - 36 dBA
Fan Connector4 Pin
ColorBlack
Pressure0.20 – 4.15 mm-H2O
Tube Dim.450mm
Tube MaterialBlack Sleeved Low-Permeation Rubber
Package ContentsCORSAIR NAUTILUS 360 RS
3x RS120 fans
Mounting Kit for All Modern CPU Sockets
Fan and Radiator Mounting Screws
Warranty & Safety Leaflet
Shipping weight2.38 kg
Package size445 × 191 × 131 mm

Questions about this item

Will the 396 mm radiator and 450 mm tubes fit my mid-tower case?

The radiator measures 396 mm long and needs three 120 mm fan slots; the 450 mm tubes give some routing slack but check your case specs for 360 mm radiator clearance and tube bend radius.

How do I connect the three RS120 fans and the pump using the daisy-chain, and what is the common mistake?

Plug the daisy-chain into a single 4-pin motherboard header; the step often missed is setting the header to PWM mode in BIOS so the 0–2100 RPM range and 10–36 dBA curve work correctly.

Does the pre-applied thermal paste on the convex cold plate need replacing later?

The paste is applied in an optimised pattern for first install; if you remount the block or see temperatures rise after a few years, clean with isopropyl alcohol and apply a fresh pea-sized dot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.