Crucial CT064M4SSD2 M4 64GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Crucial
2.5-inch SATA internal SSD with 256GB capacity, MLC memory and sequential reads up to 500MBps
Options 256GB
This 2.5" SATA internal SSD uses MLC NAND and a Marvell controller to deliver 256GB of storage for notebooks, desktops and workstations. It targets everyday client computing where low power draw and resistance to shock matter. Sequential reads reach 500MBps on a 6Gbps link and 265MBps on a 3Gbps link.
The drive drops into any standard 2.5" bay and connects with a regular SATA data and power cable. No extra drivers are required because the operating system sees a normal AHCI device. The only common issue is leaving the host controller in IDE mode, which caps throughput at the slower 3Gbps rate.
Sustained sequential write holds at 260MBps while random 4KB performance reaches 45,000 read IOPS and 50,000 write IOPS. Average access time stays below 0.1ms and the controller includes built-in EDC/ECC plus SMART monitoring. Power draw remains at 0.16W active and under 85mW idle across the 0°C to 70°C operating range.
| Brand | Crucial |
|---|---|
| Series | M4 |
| Model | CT256M4SSD2 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 256GB |
| Memory Components | MLC |
| Interface | SATA III |
| Controller | Marvell |
| Sustained Sequential Read | Up to 500MBps (SATA 6Gbs); 265MBps (SATA 3Gbs) |
| Sustained Sequential Write | Up to 260MBps (SATA 6Gbps) |
| 4KB Random Read | Up to 45,000 IOPS |
| 4KB Random Write | Up to 50,000 IOPS |
| MTBF | 1,200,000 hours |
| Features | Integrated 8-channel single chip Controller Self-monitoring, analysis, and reporting technology (SMART) command set RAID Support Average Access Time < 0.1 ms Data Reliability: Built-in EDC/ECC |
| Power Consumption (Idle) | < 85 mW |
| Power Consumption (Active) | 0.16W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 9.5mm |
| Width | 69.85mm |
| Depth | 100.5mm |
| Weight | 75g |
| Shipping weight | 0.11 kg |
| Package size | 130 × 130 × 42 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Run a SATA 6Gbps benchmark tool such as CrystalDiskMark; a healthy drive on a 6Gbps port should show sustained reads near 500 MB/s and writes near 260 MB/s.
The drive ships as a bare 2.5" SATA SSD; you must provide a SATA data cable, a SATA power connection and, if your bay is 3.5", a mounting bracket.
The CT256M4SSD2 is the 256 GB variant of the M4 series and already uses MLC flash with the Marvell controller; select this part number for that configuration.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?