We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Crucial

Crucial CT2K4G4DFS824A 8GB (2×4GB) DDR4 2400MHz desktop RAM

SKU CH-J9BQ-WF3A4 MPN CT2K4G4DFS824A

Dual-channel 8 GB DDR4 kit at 2400 MHz with CL17 latency and 1.2 V operation

  • Capacity8GB (2 x 4GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • Up to 32% more bandwidth with DDR4 2400 speed
  • Up to 40% less power draw at 1.2 V
  • CL17 latency for responsive data access
  • 100% factory tested for dependable operation
  • Dual-channel 2×4 GB kit for balanced capacity

8GB dual-channel DDR4 kit

This Crucial kit provides 8GB of desktop memory as two matched 4GB modules. It runs at DDR4 2400 with a CAS latency of CL17 and operates at 1.20V. The unbuffered, non-ECC DIMMs use a 288-pin form factor and are 100% factory tested for reliability.

Suits standard desktop upgrades

Builders adding memory to a typical office or home PC will find the speed and voltage a direct fit for many mainstream boards. Systems that require ECC error correction, registered modules or speeds above 2400 MT/s will need different memory.

Single-rank x8 DDR4 2400 specification

Each module is a single-rank, x8-based DIMM rated at PC4-19200. This organisation determines compatibility with the memory controller, so verify that your platform supports single-rank DDR4 2400 before purchase.

Highlights

  • Up to 32% more bandwidth with DDR4 2400 speed
  • Up to 40% less power draw at 1.2 V
  • CL17 latency for responsive data access
  • 100% factory tested for dependable operation
  • Dual-channel 2×4 GB kit for balanced capacity

Specifications

BrandCrucial
ModelCT2K4G4DFS824A
Capacity8GB (2 x 4GB)
Type288-Pin PC RAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesSpeeds start at 2133 MT/s and faster data rates are expected to be available as DDR4 technology matures
Increase bandwidth by up to 32%
Reduce power consumption by up to 40%
Faster burst access speeds for improved sequential data throughput
Optimized for next generation processors and platforms
Available in four channel kits up to 64GB
Shipping weight0.08 kg
Package size157 × 119 × 13 mm

Questions about this item

Will these CL17 1.2V DDR4 2400 DIMMs run alongside older DDR4 sticks at 2133 MT/s?

Yes, the kit is rated DDR4 2400 CL17 1.2V and the spec notes speeds start at 2133 MT/s, so mixed modules will settle at the lowest common speed.

How can I confirm the kit is running at the rated 2400 MT/s CL17 after installation?

Check the memory tab in CPU-Z or the BIOS memory info screen; it should show 2400 MT/s (PC4-19200) with CAS latency 17 at 1.20 V.

What exactly ships in the CT2K4G4DFS824A box and is anything else required?

Two 4 GB unbuffered non-ECC 288-pin DIMMs; no heat spreader, cables or software are included and nothing extra is needed for a standard desktop slot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.