We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
2.5 inch SATA SSD in black 3.5 inch hybrid carrier tray

DELL

DELL 0X31G3 960GB SATA Enterprise SSD

SKU CH-0RFE-GMHJK

960 GB SATA enterprise SSD with 3 DWPD endurance, 560 MB/s read, 510 MB/s write, hot-swap support and a 2.5-to-3.5 inch tray for Dell PowerEdge 14th-16th Gen servers

  • Form Factor2.5"
  • Capacity960GB
  • InterfaceSATA III
  • Sustained Sequential Read560 MB/s
  • Sustained Sequential Write510 MB/s
  • Endurance3 DWPD
  • 960 GB capacity stores large datasets
  • 3 DWPD endurance handles heavy mixed-use workloads
  • 560 MB/s read and 510 MB/s write speeds accelerate data access
  • Hot-swappable design enables drive replacement without downtime
  • Compatible with 14th 15th and 16th Gen PowerEdge servers

Dell 0X31G3 Enterprise SATA SSD

The Dell 0X31G3 is a 960GB enterprise solid-state drive built for 14th, 15th and 16th generation PowerEdge servers. It uses a SATA 6Gb/s interface with 3D TLC NAND and ships in a hybrid 2.5 to 3.5 inch tray for hot-swap bays. Rated at 3 DWPD, it suits mixed-use workloads in rack and tower systems.

Suits mixed-use server and storage arrays

This drive fits Dell PowerEdge rack models from the R250 through R960 families and tower models T40 to T440 that accept 3.5 inch carriers. It is not for systems that need U.2 or M.2 form factors. It is not for workloads that exceed the 3 DWPD endurance rating or that require higher sequential throughput than 560 MB/s read and 510 MB/s write.

3 DWPD endurance rating

The 3 drive-writes-per-day endurance figure is the single specification that determines whether this SSD matches your workload. At 960GB capacity, that rating defines the total bytes you can write over the warranty period. If your application writes more data daily than this rating allows, select a higher-endurance model.

Highlights

  • 960 GB capacity stores large datasets
  • 3 DWPD endurance handles heavy mixed-use workloads
  • 560 MB/s read and 510 MB/s write speeds accelerate data access
  • Hot-swappable design enables drive replacement without downtime
  • Compatible with 14th 15th and 16th Gen PowerEdge servers

Specifications

BrandDell
SeriesGeneration 14
Model0X31G3
Form Factor2.5"
Capacity960GB
InterfaceSATA III
Sustained Sequential Read560 MB/s
Sustained Sequential Write510 MB/s
Endurance3 DWPD
FeaturesHot Swappable

Questions about this item

Do I need a Dell G14 hybrid tray like the X7K8W to mount this 2.5 inch drive in a 3.5 inch bay?

Yes, the drive ships installed in that Dell G14 hybrid tray which adapts the 2.5 inch form factor to 3.5 inch bays.

Will this SATA III SSD work in a PowerEdge R740 that currently uses mechanical hard drives?

Yes, it uses the same SATA 6Gb/s interface and fits the 3.5 inch chassis when mounted in the supplied hybrid tray.

How can I verify the drive is delivering its rated 560 MB/s read and 510 MB/s write speeds after installation?

Run a sequential benchmark tool such as CrystalDiskMark or fio and compare the results to the 560 MB/s read and 510 MB/s write specifications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.