We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch internal hard drive with SAS connector

DELL

DELL 1.2TB 10000RPM SAS 2.5in internal hard drive 1FF200-150

SKU CH-8KVX-P5TZ3

1.2 TB 2.5 in SAS drive spins at 10000 RPM with 128 MB cache for Dell PowerEdge servers

  • 2TB capacity for data-intensive workloads
  • 10000RPM spindle speed reduces access latency
  • SAS 6Gb/s interface supports high-throughput server arrays
  • 128MB cache buffer accelerates frequent read operations
  • Compatible with Dell PowerEdge M600 through T710 platforms

Capacity and interface

This is a new Dell 1.2TB 10000RPM SAS 6Gb/s internal hard drive in a 2.5in form factor. It is built for Dell PowerEdge servers that accept 2.5in SAS drives and need high spindle speed for transactional workloads. The drive carries 128MB of cache and the original Dell part number 1FF200-150.

Compatibility checklist

Before ordering, confirm that your server backplane and controller support 2.5in SAS 6Gb/s drives and that a drive bay is free. Check the system documentation for the exact PowerEdge model to ensure the drive is on the qualified list. Verify the drive carrier or caddy required for your chassis is available separately if not already installed.

Thermals noise and power

As a 10000RPM mechanical drive, it generates more heat and audible seek noise than slower nearline drives or solid-state alternatives. Typical operation will raise the local chassis temperature, so ensure the server fan profile is set for high-performance drives. Power draw follows the SAS 6Gb/s specification for 2.5in enterprise drives under normal read and write loads.

Highlights

  • 2TB capacity for data-intensive workloads
  • 10000RPM spindle speed reduces access latency
  • SAS 6Gb/s interface supports high-throughput server arrays
  • 128MB cache buffer accelerates frequent read operations
  • Compatible with Dell PowerEdge M600 through T710 platforms

Specifications

No published specifications for this item yet.

Questions about this item

Does the drive ship with a mounting bracket or caddy for a 2.5in bay, or must I order one separately?

The drive is supplied as the bare 2.5in mechanism; a Dell-specific hot-plug tray or caddy for your PowerEdge server is not included and must be sourced separately.

My server takes both 600GB and 1.2TB 10K SAS drives — which capacity should I choose?

Choose the 1.2TB model when you need maximum raw capacity per bay; choose the smaller drive only if your controller or budget limits you to the lower capacity.

What does the 10000RPM spindle speed mean for real-world performance in a PowerEdge server?

The 10000RPM rotation reduces rotational latency and raises sustained transfer rates, giving faster random I/O for databases and virtualisation workloads on compatible PowerEdge systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.