DELL
DELL 3PR5C 480GB 12Gbps SAS 2.5 enterprise SSD
A 480 GB SAS enterprise SSD for Dell PowerEdge servers from R230 to R940XA
- InterfaceSAS
- 12 Gbps SAS interface supports fast data transfer
- 480 GB capacity provides space for mixed workloads
- 5 inch form factor fits standard drive bays
- Compatible with Dell PowerEdge servers including R640 and R740
- New condition with updated firmware and tested components
Dell 480 GB 12 Gbps SAS SSD
This 480 GB Dell 3PR5C drive uses a 12 Gbps SAS interface and mixed-use TLC flash in a 2.5 inch form factor. It is built for Dell PowerEdge servers that require balanced read and write performance. The component arrives new with updated firmware and tested operation.
For PowerEdge mixed-use workloads
The drive suits administrators deploying Dell PowerEdge models such as the R630, R740, R740XD, R750, T640 and compatible ME4012 or ME4024 arrays where a 12 Gbps SAS mixed-use SSD is specified. It is not for platforms that lack a 12 Gbps SAS backplane or that require a different physical form factor.
12 Gbps SAS interface decides fit
The single specification that determines compatibility is the 12 Gbps SAS interface; the server or storage array must provide a matching SAS connection and 2.5 inch drive bay. Without that interface the drive cannot be installed or used.
Highlights
- 12 Gbps SAS interface supports fast data transfer
- 480 GB capacity provides space for mixed workloads
- 5 inch form factor fits standard drive bays
- Compatible with Dell PowerEdge servers including R640 and R740
- New condition with updated firmware and tested components
Specifications
| Brand | Dell |
|---|---|
| Model | 3PR5C, KPM5XVUG480G |
| Interface | SAS |
Questions about this item
What drive bay size does the 2.5 inch SAS SSD require?
The SSD fits a standard 2.5 inch hot-plug drive bay found in the listed Dell PowerEdge servers.
How is the 12Gbps SAS SSD installed in a compatible PowerEdge server?
Slide the drive into an empty 2.5 inch bay until the SAS connector seats firmly; the common mistake is stopping before the latch clicks.
When should the 480GB mixed-use TLC SSD be replaced?
Replace the drive when the SSD life-remaining indicator in iDRAC or OpenManage reports critically low endurance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Western Digital WD6NPURX Purple NV 6TB 5400 RPM 64MB SATA 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s
Seagate ST380215A 80GB 7200 RPM 2MB IDE 3.5" internal hard drive
- Bare Drive
- IDE Ultra ATA100 /…
HGST 0F23269 6TB 7200 RPM 128MB SATA 6.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s



