We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL 400-ANGI 8TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-NVF5-R58F3

An 8 TB 3.5" SAS 12 Gb/s hard drive spinning at 7200 RPM with hot-swap capability

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 8 TB capacity for large-scale data storage
  • SAS 12 Gb/s interface enables fast host transfers
  • 7200 RPM spindle speed supports steady throughput
  • 5-inch form factor fits standard drive bays
  • Hot-swap tray allows drive replacement without shutdown

Dell 400-ANGI 8TB Nearline SAS Drive

This Dell 400-ANGI is an 8TB 3.5" internal hard drive built for nearline workloads. It connects through a SAS 12Gb/s interface and spins at 7200 RPM. The bare-drive unit supports hot-swap trays for quick replacement in compatible enclosures. It suits administrators who need reliable bulk storage in Dell or standards-based servers.

Capacity and headroom for nearline duties

Eight terabytes provides substantial room for backups, archives and secondary data sets that are accessed regularly but not continuously. The 7200 RPM spindle delivers steady throughput for sequential reads and writes across the full capacity. Random I/O performance will taper off under heavy concurrent request queues typical of primary database or virtualisation workloads. The drive is not designed for write-intensive, low-latency tiers.

SAS 12Gb/s interface practical limits

The 12Gb/s SAS link caps maximum burst transfer at the bus rate, while sustained throughput is governed by the 7200 RPM mechanics. Dual-port SAS enables multipath redundancy but does not double single-stream bandwidth. Cable length, expander topology and controller queue depth all affect realised performance. The drive cannot saturate the interface with random small-block access patterns.

Highlights

  • 8 TB capacity for large-scale data storage
  • SAS 12 Gb/s interface enables fast host transfers
  • 7200 RPM spindle speed supports steady throughput
  • 5-inch form factor fits standard drive bays
  • Hot-swap tray allows drive replacement without shutdown

Specifications

BrandDell
Model400-ANGI
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity8TB
RPM7200 RPM
Form Factor3.5"

Questions about this item

Will the 400-ANGI 3.5" SAS drive work in a server that only has 6Gb/s SAS backplanes?

Yes, the 12Gb/s interface is backwards compatible with 6Gb/s SAS controllers, so the 8TB drive will operate at the lower link speed without configuration changes.

How can I confirm the 7200 RPM drive is running at the correct 12Gb/s link speed after installation?

Check the negotiated link rate in your RAID controller BIOS or OS utility; it should report 12Gb/s for the 400-ANGI if the backplane and cabling support the full speed.

Does the bare-drive 400-ANGI package include a hot-swap tray or mounting screws for a Dell PowerEdge bay?

The drive is supplied as a bare unit without a tray or screws; you must reuse the original Dell hot-swap carrier or purchase a compatible 3.5" caddy separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.