We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL 56M6W 1TB 2.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-4Z88-681RK

A 1 TB 2.5-inch SAS 12Gb/s hard drive spinning at 7200 RPM for nearline storage with hot-swap support

  • InterfaceSAS 12Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • Form Factor2.5"
  • 1TB capacity for ample storage space
  • 7200 RPM spindle speed for responsive data access
  • 12Gb/s SAS interface enables high throughput
  • 5 inch form factor fits dense drive bays
  • Hot-swap tray allows drive replacement without downtime

Dell 56M6W 1TB SAS hard drive

This 1 TB 2.5 inch SAS drive spins at 7 200 RPM and connects through a 12 Gb/s interface. It is built for Dell servers and storage arrays that accept hot-swap 2.5 inch nearline drives.

Upgrade from slower nearline SAS drives

Replacing a lower-capacity or lower-RPM nearline SAS drive with this 1 TB 7 200 RPM model adds both space and throughput for read-heavy workloads. The jump is worth it when your array needs more capacity per bay and can use the 12 Gb/s link speed.

Check SAS backplane and hot-swap tray compatibility

Verify that your chassis provides a 12 Gb/s SAS backplane and a 2.5 inch hot-swap tray that matches the drive's connector. Confirm the controller firmware supports the drive before ordering.

Highlights

  • 1TB capacity for ample storage space
  • 7200 RPM spindle speed for responsive data access
  • 12Gb/s SAS interface enables high throughput
  • 5 inch form factor fits dense drive bays
  • Hot-swap tray allows drive replacement without downtime

Specifications

BrandDell
Model56M6W
InterfaceSAS 12Gb/s
Capacity1TB
RPM7200 RPM
Form Factor2.5"

Questions about this item

Does the 2.5" 56M6W need a tray or caddy to mount in a server bay?

The drive uses a hot-swap tray marked HS so it slides directly into a compatible 2.5" SAS bay without an extra caddy.

What is the first step when installing the 56M6W in a hot-swap chassis?

Insert the drive firmly until the tray latch clicks, then verify the SAS connector seats fully on the backplane before powering on.

How often should the 7200 RPM SAS drive be checked for predictive failure alerts?

Monitor SMART attributes and Dell OpenManage logs monthly; replace the drive if reallocated-sector count or seek-error rate begins to rise.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.