DELL
DELL 960GB 12Gbps SAS 2.5 enterprise SSD PM1633a 7FNRX
A 960 GB enterprise SAS SSD with 12 Gbps interface for read-intensive workloads in Dell PowerEdge servers
- InterfaceSAS
- 960 GB capacity stores large datasets
- 12 Gbps SAS interface moves data quickly
- Read-intensive TLC suits heavy read workloads
- 5 inch form factor fits standard bays
- Compatible with Dell PowerEdge servers
960 GB SAS enterprise SSD
This 960 GB SAS solid-state drive uses read-intensive TLC NAND for server workloads that favour consistent read throughput. It fits 2.5-inch hot-plug bays in compatible Dell PowerEdge platforms. The PM1633a firmware has been updated and each unit is tested before dispatch.
12 Gbps interface thermal profile
The SAS 12 Gbps link keeps data moving without saturating the backplane during sustained reads. Read-intensive tuning limits write amplification, which helps maintain steady temperatures inside dense chassis. Power draw scales with queue depth rather than peaking on burst activity.
Dell PowerEdge compatibility list
The drive is validated for a wide range of PowerEdge rack, tower and modular servers including R630, R740, R750, MX740c and MX750C lines. It also supports MD1400 and MD1420 storage arrays. No extra carrier or adapter is required for the listed systems.
Highlights
- 960 GB capacity stores large datasets
- 12 Gbps SAS interface moves data quickly
- Read-intensive TLC suits heavy read workloads
- 5 inch form factor fits standard bays
- Compatible with Dell PowerEdge servers
Specifications
| Brand | Dell |
|---|---|
| Model | 7FNRX, MZILS960HEHP0D3 |
| Interface | SAS |
Questions about this item
How do I install the 2.5-inch SAS SSD into a Dell PowerEdge R740 and what step is often missed?
Slide the drive into a hot-plug bay until the carrier clicks, then verify the controller sees the 12Gbps link; the step often missed is confirming the backplane negotiates 12Gbps instead of falling back to 6Gbps.
What maintenance or replacement will the PM1633a read-intensive TLC drive need over its service life?
As a read-intensive TLC device it has a lower write endurance budget, so plan to replace the drive once the media wears to the rated endurance limit or if SMART attributes report reallocated sectors.
What limit appears first when the 960GB SSD runs sustained workloads in a 12Gbps SAS environment?
The 12Gbps SAS interface bandwidth ceiling is reached before the internal TLC media saturates, making the link the first bottleneck during continuous sequential transfers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Western Digital WD6NPURX Purple NV 6TB 5400 RPM 64MB SATA 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s
Seagate ST380215A 80GB 7200 RPM 2MB IDE 3.5" internal hard drive
- Bare Drive
- IDE Ultra ATA100 /…
HGST 0F23269 6TB 7200 RPM 128MB SATA 6.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s



