We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5 inch bare SAS hard drive with exposed circuit board

DELL

DELL EQUALLOGIC MK2001TRKB 2TB 7.2K RPM 6Gbps 3.5" SAS internal hard drive

SKU CH-QQB0-GXETQ

A 2TB 3.5-inch SAS drive spinning at 7200RPM with a 16MB buffer for desktop storage

  • 2 TB capacity stores large data sets
  • 7200 RPM spindle speed delivers responsive throughput
  • 6 Gbps SAS interface connects directly to compatible controllers
  • 16 MB cache buffers bursts for smoother I/O
  • 5 inch form factor fits standard desktop drive bays

Dell EqualLogic 2 TB SAS drive

The Dell EqualLogic MK2001TRKB is a 2000 GB internal hard drive that spins at 7200 RPM and connects through a 3.5 inch SAS 6 Gb/s interface. It carries a 16 MB cache and ships as a bare drive in new condition.

Suits SAS arrays and compatible Dell systems

This drive fits servers and storage arrays that accept 3.5 inch SAS devices running at 6 Gb/s. Buyers whose chassis or controller only support narrower interfaces or different form factors should look at other parts.

6 Gb/s SAS interface

The single specification that decides fit is the 6 Gb/s SAS interface; the system backplane and controller must match this exact connection type for the drive to function.

Highlights

  • 2 TB capacity stores large data sets
  • 7200 RPM spindle speed delivers responsive throughput
  • 6 Gbps SAS interface connects directly to compatible controllers
  • 16 MB cache buffers bursts for smoother I/O
  • 5 inch form factor fits standard desktop drive bays

Specifications

No published specifications for this item yet.

Questions about this item

What controller or backplane do I need to run this 3.5" SAS 6Gb/s drive?

You need a SAS host bus adapter or RAID controller with a 6Gb/s external or internal port, plus a 3.5-inch drive bay and SAS power and data cables.

Will this MK2001TRKB work in a chassis that only supports 3Gb/s SAS backplanes?

Yes, the drive negotiates down to 3Gb/s automatically, so it will function on older 3Gb/s SAS backplanes at the lower link speed.

How can I verify the drive is healthy and running at 7200RPM after installation?

Check SMART data for the rotational speed field and run a short self-test; the drive should report 7200RPM and pass without errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.