DELL
DELL F750E-S0 750W Platinum power supply
750 W 80 Plus Platinum redundant power supply for PowerEdge R520, R620, R720, R720XD, R820, T320, T420, T620 and PowerVault DL4000, DR4100, DX6112
- Maximum Power750 W
- Fans1
- Input Voltage100 - 240 V
- Input Frequency Range50/60 Hz
- Output750w
- Weight3.1
- 750 W output powers demanding PowerEdge servers
- 80 Plus Platinum efficiency reduces energy waste
- 100–240 V auto-ranging input works worldwide
- Redundant hot-plug design keeps systems running
- 1 kg unit fits standard server bays
Dell 750W Platinum PSU for PowerEdge
The Dell F750E-S0 is a 750 W redundant power supply rated 80 Plus Platinum for select PowerEdge and PowerVault servers. It accepts 100 to 240 V input at 50 or 60 Hz and fits hot-plug bays in the listed rack and tower chassis.
Thermals noise and power draw
A single internal fan provides cooling while the Platinum rating keeps conversion losses low during typical server loads. The unit draws up to 750 W from the mains when the system demands full output, and the fan speed scales with temperature to balance airflow and acoustic output.
Hot-plug redundant form factor
The supply uses the Dell hot-plug form factor so it can be inserted or removed without powering down compatible PowerEdge R520, R620, R720, R720XD, R820, T320, T420, T620 and PowerVault DL4000, DR4100, DX6112 systems. It weighs 3.1 units and is not suited for standard ATX desktop cases or non-Dell proprietary chassis.
Highlights
- 750 W output powers demanding PowerEdge servers
- 80 Plus Platinum efficiency reduces energy waste
- 100–240 V auto-ranging input works worldwide
- Redundant hot-plug design keeps systems running
- 1 kg unit fits standard server bays
Specifications
| Brand | Dell |
|---|---|
| Series | PowerEdge R620 R720 R720XD |
| Model | F750E-S0 |
| Maximum Power | 750 W |
| Fans | 1 |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Output | 750w |
| Weight | 3.1 |
Questions about this item
How do I slide the Dell F750E-S0 into the server chassis and what step is often missed?
Align the unit with the hot-plug bay rails, push until the latch clicks, then tighten the captive retention screw; skipping the screw leaves the supply unsecured and can break redundancy.
Which part will need replacement first during long-term operation?
The single internal fan is the only moving component; bearing wear over time makes it the first item to require service.
At what sustained load does the 750 W limit become the binding constraint?
Continuous draw above 750 W triggers protection; the supply is rated for a maximum output of 750 W, so that ceiling is reached first under heavy, steady workloads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



