DELL
DELL HUC103030CSS600 300GB 10000RPM 2.5" SAS internal hard drive
A 300 GB, 10 000 RPM, 2.5-inch SAS hard drive for compatible Dell PowerEdge servers
- 300 GB capacity stores more enterprise data
- 10,000 RPM spindle delivers faster transaction throughput
- 5-inch small form factor fits dense server chassis
- SAS interface enables dual-port redundancy paths
- Compatible with PowerEdge R330 R730 M605 M610 M710 M905
Dell 300 GB 10K SAS Drive
The Dell HUC103030CSS600 is a 300 GB 2.5-inch SAS hard drive spinning at 10,000 RPM. It is built for Dell PowerEdge servers such as the R330, R730, M605, M610, M710 and M905. The drive uses a SAS interface for direct connection to compatible backplanes and controllers.
Suits SAS Bays, Not SSD Slots
This drive fits administrators who need a 10K RPM mechanical disk for existing SAS hot-plug bays in the listed PowerEdge models. It does not suit buyers who need larger capacities, solid-state speeds or a different physical interface. The 2.5-inch form factor matches the SFF drive carriers used in these servers.
10,000 RPM SAS Specification
The single specification that decides fit is the 10,000 RPM rotation speed combined with the SAS interface. Only systems designed for 2.5-inch 10K SAS drives can accept this part; slower or faster spindle speeds and other interfaces will not work in the same slot.
Highlights
- 300 GB capacity stores more enterprise data
- 10,000 RPM spindle delivers faster transaction throughput
- 5-inch small form factor fits dense server chassis
- SAS interface enables dual-port redundancy paths
- Compatible with PowerEdge R330 R730 M605 M610 M710 M905
Specifications
No published specifications for this item yet.
Questions about this item
Does my server need a SAS controller to use this 300GB 10000RPM drive?
Yes, the drive uses a SAS interface and requires a compatible SAS host bus adapter or RAID controller in the server.
Will this 2.5" 300GB SAS drive fit in a Dell PowerEdge R730 alongside existing 3.5" drives?
The R730 supports 2.5" drives in its SFF chassis, but 3.5" drives use a different bay size; you cannot mix form factors in the same backplane slot.
How can I confirm the drive is recognised at 300GB and 10000RPM after installation?
Check the RAID controller BIOS or operating system disk utility; it should report the model HUC103030CSS600 with 300GB capacity and 10000RPM speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
