We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge M640 Blade 2× Xeon Gold 6134 3.2 GHz 48 GB DDR4 2× 900 GB SAS

SKU CH-9AG9-AMQ1W

Blade server with dual 3.2 GHz Xeon Gold 6134 processors, 48 GB DDR4 ECC memory and two 900 GB SAS 2.5-inch drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed3.2 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size48GB
  • Dual Xeon Gold 6134 CPUs at 3.2 GHz power multi-threaded workloads
  • 48 GB DDR4 ECC memory supports virtualisation density
  • 2× 900 GB 10K SAS drives deliver fast sequential throughput
  • PERC H330 RAID controller protects data with hardware redundancy
  • iDRAC9 Enterprise enables remote firmware updates and monitoring

Dell PowerEdge M640 blade server

The Dell PowerEdge M640 is a blade server equipped with two Intel Xeon Gold 6134 processors running at 3.2 GHz. It comes with 48 GB of DDR4 ECC registered memory and a PERC H330 SAS storage controller. Remote management is handled by iDRAC9 Enterprise.

Suited for dense compute clusters

This configuration suits deployments that need two-socket performance in a half-height blade form factor with 10 GbE networking built in. Buyers who need more than two internal drives or a different drive interface should look at other platforms. Workloads requiring GPU acceleration are not supported by the integrated graphics.

1.8 TB of 10K SAS storage

The server ships with two 900 GB 2.5-inch 10K SAS hard drives providing 1.8 TB of raw capacity. The PERC H330 controller manages RAID for these drives. Maximum memory capacity reaches 1 TB across the available DIMM slots.

Highlights

  • Dual Xeon Gold 6134 CPUs at 3.2 GHz power multi-threaded workloads
  • 48 GB DDR4 ECC memory supports virtualisation density
  • 2× 900 GB 10K SAS drives deliver fast sequential throughput
  • PERC H330 RAID controller protects data with hardware redundancy
  • iDRAC9 Enterprise enables remote firmware updates and monitoring

Specifications

BrandDELL
SeriesPowerEdge
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed3.2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size48GB
Memory TypeDDR4 SDRAM
Max Memory Capacity1TB
Hard Drive (Installed)1.800,00
Storage ControllerDell PERC H330 SAS Storage Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementiDRAC9 Enterprise
Dimensions22 x 22x 10 in
Weight20

Questions about this item

What chassis slot width does the 22 x 22 x 10 in blade require?

The blade occupies a standard half-height slot in a compatible Dell PowerEdge chassis.

What step is often missed when seating the blade in the chassis?

Engage the release lever fully until it clicks to lock the blade into the midplane connectors.

When should the 2.5-inch 900 GB SAS drives be replaced in a RAID array?

Replace a drive when the PERC H330 controller flags a predictive failure or the iDRAC9 reports a degraded virtual disk.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.