DELL
DELL PowerEdge M640 Blade Server 2x Xeon Gold 6128 64GB 2x 4TB SATA
Blade server with dual Xeon Gold 6128 CPUs at 3.4 GHz, 64 GB DDR4 memory, two 4 TB SATA drives and PERC H330 RAID controller
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed3.4 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size64GB
- Dual Xeon Gold 6128 CPUs deliver 12 cores at 3.4 GHz
- 64 GB DDR4 ECC memory supports virtualization workloads
- Dual 4 TB SATA drives provide 8 TB raw capacity
- PERC H330 RAID controller enables hardware RAID 0/1/5/10
- iDRAC9 Enterprise gives full remote server management
Dell PowerEdge M640 Blade Server
This Dell PowerEdge M640 blade server contains two Intel Xeon Gold 6128 processors running at 3.4 GHz with 19.25 MB cache each. It comes with 64 GB of DDR4 ECC registered memory installed and supports a maximum capacity of 1 TB. The system includes a PERC H330 SAS storage controller and integrated graphics.
Suited for virtualisation hosts needing dual CPUs
This configuration suits administrators deploying virtualised workloads that benefit from twelve total cores and 64 GB of RAM. Buyers who need more than 1 TB of memory or more than two 2.5-inch drive bays should consider a different platform. The single 10 GbE two-port adapter may limit network-heavy clusters.
Dual Xeon Gold 6128 processors at 3.4 GHz
The two Xeon Gold 6128 CPUs deliver twelve cores at a base frequency of 3.4 GHz, which determines the compute ceiling for this blade. The PERC H330 controller manages the two installed 4 TB SATA drives in a 2.5-inch form factor. Remote management is handled by iDRAC9 Enterprise with firmware updated before shipping.
Highlights
- Dual Xeon Gold 6128 CPUs deliver 12 cores at 3.4 GHz
- 64 GB DDR4 ECC memory supports virtualization workloads
- Dual 4 TB SATA drives provide 8 TB raw capacity
- PERC H330 RAID controller enables hardware RAID 0/1/5/10
- iDRAC9 Enterprise gives full remote server management
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 3.4 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 1TB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | Dell PERC H330 SAS Storage Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 Enterprise |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions about this item
How can I verify the M640 blade is operating correctly once it is installed in the chassis?
Check the iDRAC9 Enterprise interface for green health status on both Xeon Gold 6128 CPUs, the 64 GB DDR4 memory and the PERC H330 controller, then confirm the 10 Gb 562T adapter shows link activity.
What components are included with the blade and what must be sourced separately?
The blade ships with two Xeon Gold 6128 processors, 64 GB DDR4 ECC registered memory, two 4 TB SATA 2.5" drives and the PERC H330 RAID controller; a rail kit is available on request.
Which configuration should I choose if I need the maximum supported memory capacity?
This unit has 64 GB installed and supports up to 1 TB of DDR4, so select a configuration that adds the required memory modules to reach your target capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



