DELL
DELL PowerEdge R360 Server Pentium G7400 64GB 600GB SAS
A 1U rack server with a 3.7 GHz dual-core Pentium G7400, 64 GB DDR5 ECC memory, and a single 600 GB 10k SAS drive in a four-bay 3.5" chassis
- TypeRack
- Intel Pentium G7400 dual-core processor handles entry workloads efficiently
- 64 GB DDR5 ECC memory at 5600 MT/s supports responsive multitasking
- 600 GB 10k SAS drive delivers fast sequential storage access
- 5-inch chassis accommodates up to four hot-plug drives for expansion
- 600 W hot-plug power supply enables simple maintenance without downtime
Base Server Configuration
The Dell PowerEdge R360 is a 1U rack server built around an Intel Pentium G7400 processor running at 3.7 GHz with two cores and four threads. It ships with 64 GB of DDR5 ECC memory across four 16 GB UDIMMs operating at 5600 MT/s. A single 600 GB SAS hard drive spinning at 10k RPM is installed in a 3.5-inch hybrid carrier within a chassis that supports up to four hot-plug drives.
Upgrade Path From Older Hardware
This system replaces entry-level tower servers or aging 1U racks that lack DDR5 memory and 12 Gbps SAS connectivity. The jump is worthwhile when workloads need ECC memory integrity and hot-plug drive serviceability without moving to a redundant power supply. The Front PERC H355 controller provides hardware RAID for mixed drive types while the single 600 W supply keeps cabling simple.
Pre-Installation Checklist
Verify the rack depth accommodates a standard 1U chassis and that the facility provides NEMA 5-15 outlets for the two included 10-foot power cords. Confirm the operating system supports UEFI boot with GPT partitioning as the BIOS is configured for this mode. Note that no PCIe riser is installed so expansion cards cannot be added without the appropriate riser kit.
Highlights
- Intel Pentium G7400 dual-core processor handles entry workloads efficiently
- 64 GB DDR5 ECC memory at 5600 MT/s supports responsive multitasking
- 600 GB 10k SAS drive delivers fast sequential storage access
- 5-inch chassis accommodates up to four hot-plug drives for expansion
- 600 W hot-plug power supply enables simple maintenance without downtime
Specifications
| Type | Rack |
|---|
Questions about this item
What rack depth does the 3.5" chassis with four hot-plug bays require?
The 3.5" chassis supports up to four hot-plug drives and uses a front PERC H355 controller; standard 1U rack depth accommodates it.
How is the PERC H355 RAID controller installed and what step is often missed?
The PERC H355 is a front-load module that slides into the dedicated front slot; the common miss is not fully seating the lever until it clicks.
When will the 600W non-redundant power supply need replacement?
The single 600W hot-plug supply runs at 100-240Vac; plan replacement when the system logs show degraded output or after the rated MTBF interval.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



