DELL
DELL PowerEdge R440 1U rack server 2x Xeon 6130 2.1GHz 16-core 64GB DDR4 4x 8TB SATA 2x 550W PSU
A 1U rack server with two Xeon 6130 processors, 64GB DDR4 memory, four 8TB SATA drives and dual 550W power supplies
- Dual Xeon 6130 CPUs provide 16 cores each at up to 3.7 GHz
- 64 GB DDR4-2666 ECC registered memory for reliable workloads
- 4 x 8 TB 7.2 K SATA drives with HBA330 12 Gb/s controller
- iDRAC 9 Express enables remote server management
- Dual 550 W platinum power supplies for redundancy
Dell PowerEdge R440 1U server
The Dell PowerEdge R440 is a 1U rack server built for dense data centre deployments. It ships with two Intel Xeon Gold 6130 processors and 64GB of DDR4-2666 ECC memory. The platform targets virtualization, cloud infrastructure and storage workloads in space-constrained racks.
Who this suits and who it does not
Organisations needing high compute density in a single rack unit will find the dual 16-core configuration and 4-bay 3.5" chassis aligned to that goal. Buyers who need more internal drive bays or larger memory footprints should evaluate alternative chassis designs. Teams without rack mounting infrastructure should also consider tower form factors instead.
Deciding specification: four 8TB 7.2K SATA drives
The server includes four Dell Enterprise 8TB 7.2K SATA 6Gb/s 3.5" drives connected to a PERC HBA330 12Gb/s controller. This storage complement determines whether the raw capacity and spindle speed match the intended workload before purchase.
Highlights
- Dual Xeon 6130 CPUs provide 16 cores each at up to 3.7 GHz
- 64 GB DDR4-2666 ECC registered memory for reliable workloads
- 4 x 8 TB 7.2 K SATA drives with HBA330 12 Gb/s controller
- iDRAC 9 Express enables remote server management
- Dual 550 W platinum power supplies for redundancy
Specifications
No published specifications for this item yet.
Questions about this item
Will the 2.1 GHz Xeon Gold 6130 CPUs and DDR4-2666 memory work with my existing 3.5" SATA drives?
The PERC HBA330 controller supports SAS and SATA drives, so your 3.5" SATA disks will connect to the four front bays without an adapter.
How can I confirm the iDRAC 9 Express remote management is active after first boot?
During POST the iDRAC IP address appears on the LCD panel; open that address in a browser and log in with the default credentials to verify remote access.
Which rails and bezel must I purchase separately for rack installation?
The server ships without front bezel or Ready Rails; order Dell sliding rails and the matching 1U bezel for your cabinet depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



