DELL
DELL PowerEdge R440 1U rack server 2x Xeon Gold 5118 128GB 4x 8TB H330
A 1U rack server with dual 12-core Xeon Gold 5118 processors at 2.3GHz, 128GB DDR4 ECC memory, PERC H330 controller, and four 8TB 7.2K SATA drives
- Dual Xeon Gold 5118 processors deliver 24 cores at up to 3.2GHz turbo
- 128GB DDR4-2400 ECC memory supports reliable virtualization workloads
- PERC H330 controller manages four 8TB enterprise 7.2K SATA drives
- Dual 550W platinum power supplies provide redundant 1U power
- iDRAC 9 Express enables remote server monitoring and administration
Dense 1U Rack Server
The Dell PowerEdge R440 is a 1U rackmount server built for space-constrained data centres and virtualization clusters. It ships with dual Xeon Gold 5118 processors, 128 GB of DDR4 ECC memory and a PERC H330 storage controller. Four enterprise 8 TB hard drives provide high-capacity storage out of the box.
Suitable For And Limits
This configuration suits teams that need dense compute and large spinning-disk capacity in a single rack unit. Buyers who require hardware RAID 5 or 6, solid-state drive support, or GPU acceleration should look at other platforms.
Deciding Specification
The PERC H330 controller operates in RAID 0, 1 or pass-through mode only; it does not support parity RAID levels. Confirm that your workload can tolerate this limitation before purchasing.
Highlights
- Dual Xeon Gold 5118 processors deliver 24 cores at up to 3.2GHz turbo
- 128GB DDR4-2400 ECC memory supports reliable virtualization workloads
- PERC H330 controller manages four 8TB enterprise 7.2K SATA drives
- Dual 550W platinum power supplies provide redundant 1U power
- iDRAC 9 Express enables remote server monitoring and administration
Specifications
No published specifications for this item yet.
Questions about this item
What rack rails do I need to mount this 1U server in my cabinet?
The server is a 1U rackmount unit; Dell Ready Rails are not included, so you must provide your own compatible sliding or static rails.
Will my existing 3.5-inch SATA drives work with the PERC H330 controller in this server?
Yes. The H330 supports SATA 6 Gb/s and SAS 12 Gb/s, so standard 3.5-inch SATA hard drives will connect and operate normally.
How do I confirm the two Xeon Gold 5118 processors and 128 GB of DDR4-2400 memory are recognised after first boot?
Open the iDRAC 9 Express web interface or enter the system BIOS; both will show two 12-core CPUs at 2.3 GHz and eight 16 GB DIMMs running at 2400 MT/s.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



