DELL
DELL PowerEdge R440 1U Rack Server 2x Xeon Gold 5118 2.3GHz 12 Core 32GB DDR4 H730P 8x 1.92TB SSD
1U rack server with dual 12-core Xeon Gold 5118 CPUs, 32GB DDR4 ECC, H730P RAID and eight 1.92TB SATA SSDs
- Dual Xeon Gold 5118 12-core CPUs deliver 2.3GHz base and 3.2GHz turbo performance
- 32GB DDR4-2400 ECC registered memory ensures reliable data integrity for critical workloads
- PERC H730P RAID controller supports RAID 0, 1, 5, 6, 10, 50, 60 with battery backup
- Eight 1.92TB enterprise SATA SSDs provide high-capacity solid-state storage
- iDRAC 9 Express enables remote server management and monitoring
Dense 1U Server for Virtualisation
The Dell PowerEdge R440 is a 1U rack server built for space-constrained data centres. Two Intel Xeon Gold 5118 processors deliver 24 cores at 2.3 GHz with 3.2 GHz turbo, while 32 GB of DDR4-2400 ECC memory supports reliable virtualisation and cloud workloads. Eight 1.92 TB SATA SSDs sit behind a PERC H730P controller offering RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through. Dual 550 W platinum power supplies provide redundancy in a single rack unit.
Suited to Dense Compute and Storage
This configuration fits organisations running virtual machines, databases or application hosting where rack density matters. The 1U form factor and eight-drive bay layout maximise capacity per rack slot. Buyers who need larger memory footprints, GPU acceleration or additional PCIe expansion slots should evaluate alternative platforms. The server ships without a front bezel or ready rails, so rack-mounting hardware must be sourced separately.
Controller and Management Add Value
The H730P with 2 GB cache and battery-backed write cache enables flexible RAID layouts across all eight SSDs without a separate enclosure. Integrated dual-port Gigabit Ethernet handles baseline connectivity. iDRAC 9 Express gives remote power control, hardware monitoring and firmware updates over a dedicated management port, reducing the need for physical data-centre visits during routine administration.
Highlights
- Dual Xeon Gold 5118 12-core CPUs deliver 2.3GHz base and 3.2GHz turbo performance
- 32GB DDR4-2400 ECC registered memory ensures reliable data integrity for critical workloads
- PERC H730P RAID controller supports RAID 0, 1, 5, 6, 10, 50, 60 with battery backup
- Eight 1.92TB enterprise SATA SSDs provide high-capacity solid-state storage
- iDRAC 9 Express enables remote server management and monitoring
Specifications
No published specifications for this item yet.
Questions about this item
What rackmount hardware do I need to install this 1U PowerEdge R440 server?
The server uses a 1U form factor and requires a standard four-post rack; the Ready Rails kit is not included so you must supply your own sliding rails or fixed shelf.
Can I keep my existing SAS or SATA drives when upgrading to the H730P controller in this R440?
The PERC H730P supports 12 Gb/s SAS and 6 Gb/s SATA, so older 2.5-inch SAS or SATA SSDs and HDDs will be recognised and can be configured in RAID 0, 1, 5, 6, 10, 50, 60 or pass-through mode.
How do I confirm the two Xeon Gold 5118 CPUs and 32 GB of DDR4-2400 memory are detected after first boot?
Open the iDRAC 9 Express web interface or watch the POST screen; both will show 2 processors, 24 total cores, 3.2 GHz turbo speed and 32 GB of registered ECC DDR4 running at 2400 MT/s.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



