DELL
DELL PowerEdge R440 1U rack server 2x Xeon Silver 4114 2.2GHz 10-core 64GB DDR4 8x 1.92TB SATA H730P 2x 550W
1U rack server with dual 10-core Xeon Silver 4114 CPUs, 64GB DDR4, eight 1.92TB SATA SSDs on a H730P RAID controller, and dual 550W power supplies
- Dual 10-core Xeon 4114 CPUs at 2.2GHz power virtualization workloads
- 64GB DDR4-2400 ECC memory ensures reliable data integrity
- PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50, 60
- Eight 1.92TB SATA SSDs provide high-density flash storage
- Dual 550W platinum supplies with iDRAC9 Express enable remote management
Compact 1U rack server for dense deployments
The Dell PowerEdge R440 is a 1U rackmount server built for space-efficient data centre deployment. It ships with two Intel Xeon Silver 4114 2.2GHz 10-core processors and 64GB of DDR4-2400 ECC registered memory. This configuration targets virtualisation, cloud and storage workloads that need reliable compute density in a single rack unit.
Eight-bay 2.5" storage with H730P controller
The chassis provides eight 2.5-inch drive bays populated with 1.92TB SATA 6Gb/s enterprise solid-state drives. A Dell PERC H730P 2GB 12Gb/s SAS/SATA controller with battery-backed cache manages RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through modes. Dual integrated Gigabit Ethernet ports and iDRAC 9 Express remote management handle networking and out-of-band administration. Front bezel and ready rails are not included.
Dual 550W platinum supplies for redundancy
Two 550 watt platinum-efficiency power supplies deliver redundant power for continuous operation in normal use. The 1U form factor relies on high-speed internal airflow to cool the dual 10-core processors, memory and storage subsystem. Acoustic output is typical for a rackmount server in a cooled data centre aisle. Power draw scales with workload across the two CPUs and eight drives.
Highlights
- Dual 10-core Xeon 4114 CPUs at 2.2GHz power virtualization workloads
- 64GB DDR4-2400 ECC memory ensures reliable data integrity
- PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50, 60
- Eight 1.92TB SATA SSDs provide high-density flash storage
- Dual 550W platinum supplies with iDRAC9 Express enable remote management
Specifications
No published specifications for this item yet.
Questions about this item
What RAID levels does the 12Gb/s PERC H730P controller support?
The PERC H730P handles RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through, with its 2GB cache backed by a battery to protect writes during power loss.
What drive bays and form factor does the 1U chassis provide?
The R440 fits eight 2.5-inch SATA SSDs in its front bays; the 1.92TB enterprise drives supplied fill all slots and the unit ships without a front bezel or ready rails.
How do I configure the iDRAC 9 Express remote management for first use?
Connect a network cable to the dedicated iDRAC port, power on the server, enter the iDRAC setup at boot (usually F10), set a static IP, then log in via browser to complete the initial configuration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



