DELL
DELL PowerEdge R440 8 Bay 2.5" 1U Server 2x Xeon Silver 4114 2.2GHz 256GB DDR4 H730P 8x 1.8TB HDD
A 1U rack server with two 10-core Xeon Silver 4114 processors at 2.2GHz, 256GB DDR4, H730P RAID controller, and eight 1.8TB 10K SAS drives
- Dual Xeon Silver 4114 CPUs run at 2.2 GHz base with 3.0 GHz turbo
- 256 GB DDR4-2400 ECC memory supports reliable virtualization workloads
- PERC H730P controller enables RAID 0, 1, 5, 6, 10, 50, 60 with battery backup
- Eight 1.8 TB 10K SAS drives deliver high-capacity enterprise storage
- Dual 550 W platinum power supplies provide redundant efficient power
Dense 1U rack server for virtualised workloads
The Dell PowerEdge R440 is a compact 1U rack server built for data-centre and virtualisation deployments. Two Intel Xeon Silver 4114 processors provide 10 cores each at 2.2 GHz with a 3.0 GHz turbo frequency. A total of 256 GB of DDR4-2400 ECC registered memory is installed across eight 32 GB modules. The system targets organisations that need high compute density in limited rack space.
Dual 550 W platinum supplies and 1U airflow
Two 550 watt platinum-efficiency power supplies deliver redundant power with high conversion efficiency. The 1U chassis uses front-to-rear airflow to cool both processors, memory and the eight drive bays within a shallow profile. Integrated dual-port gigabit Ethernet handles baseline network traffic without additional cards. iDRAC 9 Express provides remote monitoring and power control independent of the operating system.
PERC H730P RAID and eight 1.8 TB SAS drives
The Dell PERC H730P controller with 2 GB cache and battery backup supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Eight 1.8 TB 10K SAS hard drives connect at 12 Gb/s through the 2.5 inch front bays. SAS and SATA solid-state drives are also compatible with the backplane. The front bezel and ready rails are not included, so rack mounting hardware must be sourced separately.
Highlights
- Dual Xeon Silver 4114 CPUs run at 2.2 GHz base with 3.0 GHz turbo
- 256 GB DDR4-2400 ECC memory supports reliable virtualization workloads
- PERC H730P controller enables RAID 0, 1, 5, 6, 10, 50, 60 with battery backup
- Eight 1.8 TB 10K SAS drives deliver high-capacity enterprise storage
- Dual 550 W platinum power supplies provide redundant efficient power
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the PERC H730P controller and what step is often missed?
The PERC H730P is pre-installed; the step often missed is ensuring the RAID battery is connected and charged before configuring arrays.
What maintenance will the 1.8TB SAS drives and 550W PSUs need later?
Monitor SMART data on the 1.8TB SAS drives for reallocated sectors and replace any degraded drive; the redundant 550W PSUs are hot-swappable and should be replaced if a fault LED illuminates.
What limit appears first when the Xeon 4114 CPUs run at 3.0GHz turbo under sustained load?
The 1U chassis airflow and dual 550W PSU thermal limits constrain sustained 3.0GHz turbo operation on all 10 cores per processor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



