DELL
DELL PowerEdge R440 rack server 2x Xeon Gold 6130 2.1GHz 16 Core 32GB DDR4 4x 8TB HDD H730P 2x 550W
A 1U rack server with dual Xeon Gold 6130 CPUs, 32GB DDR4, a PERC H730P controller and four 8TB 7.2K SATA drives in 3.5-inch bays
- Dual Xeon Gold 6130 processors deliver 32 cores at 2.1GHz up to 3.7GHz turbo
- 32GB DDR4-2666 ECC registered memory ensures reliable workload operation
- PERC H730P controller supports RAID 0 1 5 6 10 50 60 with battery backup
- Four 8TB 7.2K SATA drives provide high-capacity enterprise storage
- Dual 550W platinum power supplies with iDRAC9 Express remote management
Dual Xeon Gold 6130 1U Server
The Dell PowerEdge R440 is a 1U rack server built for dense data-center deployment. It ships with two Intel Xeon Gold 6130 processors running at 2.1GHz with a 3.7GHz turbo frequency. Each CPU provides 16 cores for a total of 32 cores, supported by 32GB of DDR4-2666 ECC registered memory. The system targets virtualization, cloud, and storage workloads in space-constrained racks.
PERC H730P Storage Upgrade
The integrated PERC H730P controller adds 2GB cache and supports RAID 0, 1, 5, 6, 10, 50, and 60 plus pass-through mode. Four 8TB 7.2K SATA 3.5-inch drives are installed in the front bays, delivering 32TB raw capacity. This configuration replaces direct-attached JBOD shelves or older PERC cards that lack 12Gb/s SAS bandwidth and battery-backed write cache. The jump is worth it when workloads demand hardware RAID redundancy and consistent throughput.
iDRAC9 Express Remote Management
iDRAC 9 Express provides out-of-band remote monitoring and administration over the network. Two 550W platinum power supplies deliver redundancy without extra cabling. Installation uses standard 1U rails; the bezel and ready rails are not included, so verify rail kit compatibility with your rack before mounting. Common issues include missing rail kits and forgetting to license iDRAC Enterprise for advanced features like virtual console.
Highlights
- Dual Xeon Gold 6130 processors deliver 32 cores at 2.1GHz up to 3.7GHz turbo
- 32GB DDR4-2666 ECC registered memory ensures reliable workload operation
- PERC H730P controller supports RAID 0 1 5 6 10 50 60 with battery backup
- Four 8TB 7.2K SATA drives provide high-capacity enterprise storage
- Dual 550W platinum power supplies with iDRAC9 Express remote management
Specifications
No published specifications for this item yet.
Questions about this item
How many 3.5-inch drive bays does the R440 chassis provide?
The 1U chassis holds four 3.5-inch hot-plug bays, all occupied by the 8 TB drives.
Which rail kit is required to mount this 1U server in a standard rack?
Dell Ready Rails are needed; they are not included with the unit and must be sourced separately.
What component backs the PERC H730P controller cache and when should it be replaced?
A lithium-ion battery backs the 2 GB cache; plan to replace it every three to five years or if iDRAC reports a fault.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



