We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server front with eight 3.5-inch drive trays and bezel

DELL

Dell PowerEdge R540 2U rack server 2x Xeon Gold 5118 2.3GHz 12-core 256GB DDR4 HBA330 8x 3.5" trays 2x 750W

SKU CH-GCDQ-HMMRK

A 2U rack server with dual 12-core Xeon Gold 5118 processors, 256 GB DDR4 memory, HBA330 storage controller and eight 3.5-inch drive trays

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.30 GHz
  • CPU SocketLGA 3647
  • Dual Xeon Gold 5118 processors deliver 12 cores each at 2.3 GHz
  • 256 GB DDR4 2666 MHz ECC memory supports demanding workloads
  • PERC HBA330 controller enables 12 Gb/s SAS/SATA pass-through storage
  • Eight 3.5-inch drive bays provide high-capacity internal expansion
  • Redundant 750 W 80+ Platinum power supplies ensure continuous operation

Dell PowerEdge R540 2U rack server

This Dell PowerEdge R540 is a 2U rack server equipped with two Intel Xeon Gold 5118 processors running at 2.3 GHz with 12 cores each. It arrives with 256 GB of DDR4 registered ECC memory installed across eight 32 GB modules. The chassis provides eight 3.5-inch drive trays for SAS or SATA drives but no drives are included.

Installation notes for the R540

Rails and a front bezel are supplied so the unit can be mounted in a standard rack without extra hardware. Two hot-swap 750 W power supplies provide redundant power from the start. The PERC HBA330 controller operates in pass-through mode only, so any RAID functionality must be handled by the operating system or a separate RAID card.

Suitable workloads and limits

This server suits organisations that need dense compute and large memory capacity for virtualisation, databases or file serving in a 2U form factor. Buyers who require onboard RAID levels without adding a PERC RAID card should look elsewhere. The single integrated dual-port 1 GbE card may also limit deployments needing higher-speed or additional network connections out of the box.

Highlights

  • Dual Xeon Gold 5118 processors deliver 12 cores each at 2.3 GHz
  • 256 GB DDR4 2666 MHz ECC memory supports demanding workloads
  • PERC HBA330 controller enables 12 Gb/s SAS/SATA pass-through storage
  • Eight 3.5-inch drive bays provide high-capacity internal expansion
  • Redundant 750 W 80+ Platinum power supplies ensure continuous operation

Specifications

BrandDELL
SeriesPowerEdge
ModelR540
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.30 GHz
CPU SocketLGA 3647
Number of CPU Cores12-Core Processor
CPU FeaturesGold 5118
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity1TB
Number of Memory Slots16
Hard Drive (Installed)None
Storage ControllerDell Perc HBA330 Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelNone
Ethernet Controller1x Dell EMC Integrated Dual Port Network Daughter Card - 2x 1 Gigabit RJ45 Ports,
Remote ManagementDell EMC 14G PowerEdge iDRAC 9 Enterprise License
LAN Ports2 x Ports
Management PortRJ 45
Operating SystemNo

Questions about this item

How do I verify the dual Xeon Gold 5118 processors are running at 2.3GHz base and 3.2GHz turbo after setup?

Check the iDRAC9 Enterprise interface or BIOS System Information page; both will display the two CPUs with 12 cores each at the rated 2.30 GHz base and 3.2 GHz turbo frequencies.

The listing says 8 trays and no drives — do the trays include caddies and screws, and what else must I buy to populate the bays?

The eight 3.5" SAS/SATA trays ship with caddies and screws installed; you only need to purchase compatible 3.5" SAS or SATA hard drives or SSDs to fill the bays.

With 256GB already installed across 8 slots, which DDR4 modules should I add to reach the 1TB maximum?

Add 32GB DDR4 2666MHz Registered ECC DIMMs — the server has 16 slots total, so eight more 32GB modules will bring capacity to the 1TB limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.