DELL
DELL PowerEdge R630 10SFF 2× Xeon E5-2683 v4 2.1GHz 768GB DDR4
Dense 1U rack server with dual Xeon E5-2683 v4 processors, 768 GB DDR4 memory and ten 2.5-inch drive bays for high-density storage
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual Xeon E5-2683 v4 CPUs at 2.1GHz for heavy compute workloads
- 768GB DDR4 ECC registered memory supports large virtualisation clusters
- 10 drive bays for 2.5" SATA or SAS storage expansion
- PERC H730 RAID controller with 960GB cache for fast array performance
- iDRAC8 Enterprise enables full remote server management
Ready-to-rack compute node
The Dell PowerEdge R630 arrives as a 1U rack-mount server populated with two Xeon E5-2683 v4 processors at 2.1 GHz and 768 GB of DDR4 ECC memory. Ten 2.5-inch drive bays connect to a PERC H730 SAS controller with SATA interface, while iDRAC8 Enterprise provides remote management. Dual 495 W supplies power the platform.
Suits memory-heavy workloads
Virtualization hosts, in-memory databases and compute clusters that benefit from 16 cores per socket and a 1.5 TB memory ceiling will find the installed 768 GB a strong starting point. Buyers who need local storage out of the box should look elsewhere because drives are not installed. Sites requiring a smaller chassis or lower power draw may prefer a different form factor.
768 GB DDR4 installed
The single specification that decides fit is the 768 GB of DDR4 ECC registered memory already seated in the DIMM slots. It determines how many virtual machines, containers or data sets can reside in RAM before the system swaps to disk. Confirm the capacity matches the workload before ordering.
Highlights
- Dual Xeon E5-2683 v4 CPUs at 2.1GHz for heavy compute workloads
- 768GB DDR4 ECC registered memory supports large virtualisation clusters
- 10 drive bays for 2.5" SATA or SAS storage expansion
- PERC H730 RAID controller with 960GB cache for fast array performance
- iDRAC8 Enterprise enables full remote server management
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 9,60 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How much power do the two 495 W supplies draw when the R630 runs all day?
Each supply is rated at 495 W; the pair provides redundant power for the dual Xeon E5-2683 v4 CPUs and 768 GB DDR4 memory under continuous load.
Which drives and caddies must I already own to populate the 10 SFF bays?
The chassis accepts ten 2.5" SATA or SAS drives; no drives or caddies are included, so you must supply both.
Will my existing PERC H730 RAID configuration import directly into this R630?
Yes — the installed PERC H730 controller uses the same SAS interface and firmware baseline, so foreign-config import works without re-creating arrays.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



