DELL
DELL PowerEdge R630 10SFF 2x Xeon E5-2603 v3 384GB DDR4 No Drive
Rack server with dual 1.6 GHz Xeon E5-2603 v3 processors, 384 GB DDR4 ECC memory, ten 2.5-inch drive bays and PERC H730 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon E5-2603 v3 processors deliver 12 cores for parallel workloads
- 384GB DDR4 ECC memory supports large datasets and virtualisation
- 10-bay 2.5" chassis with PERC H730 SAS controller enables flexible storage arrays
- iDRAC8 Enterprise licence provides comprehensive remote management
- Dual 495W power supplies ensure redundant operation
Dell PowerEdge R630 10-bay server
This 1U rack server ships with two Xeon E5-2603 v3 processors running at 1.6GHz and 384GB of DDR4 ECC registered memory. It offers ten 2.5-inch drive bays backed by a PERC H730 SAS controller and includes iDRAC8 Enterprise remote management. The system is new, fully tested, and updated to the latest firmware before dispatch.
Suits memory-heavy workloads in a compact rack
The 384GB capacity fits virtualisation hosts, in-memory databases, or dense VDI deployments that need maximum RAM within a single 1U chassis. Buyers who need more than 1.5TB total memory or who require GPU acceleration should look at larger platforms. The integrated graphics and lack of installed drives also make it unsuitable for workloads demanding local high-speed storage or discrete compute out of the box.
Standard 1U rail mounting
Installation follows typical Dell rack procedures: slide the chassis into rails, connect power and network, then populate the ten hot-swap bays. The PERC H730 requires a brief RAID configuration step on first boot, and the iDRAC8 network port must be cabled separately for out-of-band access. Missing drive caddies or mismatched SAS/SATA cables are the most common oversights during initial build.
Highlights
- Dual Xeon E5-2603 v3 processors deliver 12 cores for parallel workloads
- 384GB DDR4 ECC memory supports large datasets and virtualisation
- 10-bay 2.5" chassis with PERC H730 SAS controller enables flexible storage arrays
- iDRAC8 Enterprise licence provides comprehensive remote management
- Dual 495W power supplies ensure redundant operation
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 10,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
Do I need to supply my own 2.5-inch SATA or SAS drives for the ten front bays?
Yes, the chassis provides ten 2.5-inch bays and a PERC H730 SAS controller, but no drives are installed; you must add compatible SATA or SAS drives yourself.
Will the dual Xeon E5-2603 v3 CPUs and 384 GB DDR4 memory work with my existing DDR4 RDIMMs?
The system uses DDR4 ECC registered memory up to 1.5 TB total; any additional modules must be DDR4 RDIMMs that match the server's speed and rank requirements.
How can I confirm the iDRAC8 Enterprise remote management is active after first boot?
Connect the dedicated management port, power on the server, and watch for the iDRAC IP address on the POST screen or LCD; then log in to the web interface to verify the Enterprise licence.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
$52.99$67.99−22%
0.0006748BTC
In stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
$1,267.99
0.01614719BTC
In stock