DELL
DELL PowerEdge R630 10SFF 2x Xeon E5-2650L v4 256GB DDR4 No Drive rack server
A 1U rack server with ten 2.5-inch drive bays, dual 14-core Xeon processors at 1.7 GHz, 256 GB DDR4 ECC memory and a PERC H730 SAS RAID controller, sold without drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.7 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Ten 2.5-inch drive bays provide dense local storage capacity
- Dual 14-core Xeon E5-2650L v4 processors at 1.7 GHz handle multi-threaded workloads
- 256 GB DDR4 ECC registered memory supports large virtualisation deployments
- PERC H730 SAS RAID controller protects data with hardware redundancy
- iDRAC8 Enterprise remote management enables out-of-band server control
Purpose-built density
The Dell PowerEdge R630 fits two 14-core Xeon E5-2650L v4 processors running at 1.7 GHz and 256 GB of DDR4 ECC registered memory into a 1U rack frame. Ten 2.5-inch drive bays and a PERC H730 SAS RAID controller provide the storage foundation for virtualisation clusters or database nodes that need high core counts in minimal rack space.
Fit and alternatives
This configuration suits operators who want a ready-to-deploy 12th-generation platform with dual CPUs, large memory capacity and integrated 10 GbE plus 1 GbE networking already installed. Buyers who need GPU acceleration, more than two sockets, or a chassis that accepts 3.5-inch drives will not find those capabilities here.
Deciding spec
The 1.5 TB maximum DDR4 capacity sets the ceiling for in-memory workloads; if your dataset grows beyond that limit you must move to a platform with a higher memory ceiling.
Highlights
- Ten 2.5-inch drive bays provide dense local storage capacity
- Dual 14-core Xeon E5-2650L v4 processors at 1.7 GHz handle multi-threaded workloads
- 256 GB DDR4 ECC registered memory supports large virtualisation deployments
- PERC H730 SAS RAID controller protects data with hardware redundancy
- iDRAC8 Enterprise remote management enables out-of-band server control
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.7 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 3.000,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How can I confirm the PERC H730 RAID controller and both Xeon E5-2650L v4 processors are detected after powering on the R630?
During POST the BIOS will list the PERC H730 controller and show two CPUs each with 14 cores running at 1.7 GHz; iDRAC8 Enterprise also displays both processors and the controller status in its hardware inventory.
What components are already installed in this 10-bay 2.5-inch chassis and what must I source separately?
The server ships with 2 Xeon E5-2650L v4 CPUs, 256 GB DDR4 ECC registered memory, PERC H730 SAS RAID controller, dual 495 W power supplies, Intel I350/X540 2×10 GbE + 2×1 GbE network card and iDRAC8 Enterprise; no drives or rail kit are included.
Which memory capacity should I select if I want to expand toward the maximum supported by this R630?
The system supports up to 1.5 TB of DDR4; with 256 GB already installed across 24 DIMM slots you can add matching DDR4 ECC registered modules until the 1.5 TB limit is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
$52.99$67.99−22%
0.00067734BTC
In stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
$1,267.99
0.01620787BTC
In stock