DELL
DELL PowerEdge R630 10SFF 2x Xeon E5-2650L v4 768GB DDR4 No Drive
A 1U rack server holding up to 10 2.5-inch SAS drives with dual 14-core Xeon processors at 1.7 GHz, 768 GB DDR4 memory and a PERC H730 RAID controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.7 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual 14-core Xeon processors at 1.7 GHz deliver high multi-thread throughput
- 768 GB DDR4 ECC registered memory supports large virtualised workloads
- Ten 2.5-inch drive bays with PERC H730 RAID controller enable flexible SAS storage
- iDRAC8 Enterprise licence provides full remote management and monitoring
- Dual 495 W power supplies ensure redundant power for continuous operation
Dell PowerEdge R630 10SFF dual Xeon server
This Dell PowerEdge R630 rack server fits in a 1U chassis and provides ten 2.5-inch drive bays. It ships with two Intel Xeon E5-2650L v4 processors running at 1.7 GHz and 768 GB of DDR4 ECC registered memory. The integrated PERC H730 SAS controller manages storage, and iDRAC8 Enterprise enables remote management. No drives are installed, so storage capacity is chosen separately.
Ideal for memory-heavy virtualisation
The 768 GB DDR4 capacity and fourteen cores per processor suit environments that need large memory footprints and high thread counts. The ten-bay SAS chassis supports dense local storage using 2.5-inch drives. Buyers who need GPU acceleration, single-thread speeds above 1.7 GHz, or drive interfaces other than SAS should look at other platforms.
The 1.7 GHz base clock sets the single-thread pace
Every core in the two Xeon E5-2650L v4 CPUs runs at 1.7 GHz, which determines how quickly serial tasks complete. If the workload depends on higher per-core frequency, this server will not match that requirement. For parallel, memory-bound tasks the fourteen cores and 768 GB DDR4 deliver strong throughput.
Highlights
- Dual 14-core Xeon processors at 1.7 GHz deliver high multi-thread throughput
- 768 GB DDR4 ECC registered memory supports large virtualised workloads
- Ten 2.5-inch drive bays with PERC H730 RAID controller enable flexible SAS storage
- iDRAC8 Enterprise licence provides full remote management and monitoring
- Dual 495 W power supplies ensure redundant power for continuous operation
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.7 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 3.000,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What rack width and PDU outlets does the 1U PowerEdge R630 require?
The chassis is 36 inches deep and 24 inches wide, and it ships with two 495 W power supplies that each need a separate PDU outlet.
Will my existing 2.5-inch SAS drives work with the PERC H730 controller in this R630?
Yes, the ten 2.5-inch bays and the PERC H730 SAS controller accept standard SAS drives, so any 2.5-inch SAS disks you already own can be installed directly.
How can I confirm the 768 GB of DDR4 ECC memory and both Xeon E5-2650L v4 processors are detected after first boot?
Open the iDRAC8 web interface or enter the BIOS during POST; both will show two CPUs, 14 cores each, and 768 GB of DDR4 memory installed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
$52.99$67.99−22%
0.00067503BTC
In stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
$1,267.99
0.01615274BTC
In stock