We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server with ten front 2.5-inch drive bays

DELL

DELL PowerEdge R630 10SFF 2x Xeon E5-2680 v3 768GB DDR4

SKU CH-XRHT-FZK2F

A 1U rack server with ten 2.5-inch drive bays, dual 12-core Xeon processors and 768 GB DDR4 memory

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.5GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual 12-core Xeon processors deliver 24 threads for heavy workloads
  • 768GB DDR4 ECC memory supports large datasets and virtualisation
  • Ten 2.5-inch drive bays with PERC H730 RAID controller enable flexible storage
  • iDRAC8 Enterprise licence provides full remote management and monitoring
  • Dual 495W power supplies maintain uptime during component failure

Dense compute node for virtualisation

The Dell PowerEdge R630 fits two Xeon E5-2680 v3 processors and 768 GB of DDR4 memory into a 1U rack frame with ten 2.5-inch drive bays. It targets teams running dense virtualisation, database or HPC workloads that need maximum core count and memory capacity in a single rack unit. The PERC H730 controller and dual 10 GbE ports are installed and firmware is current.

Buyers needing more than 1.5 TB of RAM

This chassis maxes out at two processors and 1.5 TB of DDR4, so workloads that scale beyond that ceiling will require a larger platform. The ten-bay front panel only accepts 2.5-inch SAS or SATA drives; 3.5-inch media cannot be mounted internally. GPU acceleration is not supported because the integrated graphics provide only basic console output.

Ten 2.5-inch SAS/SATA bays with PERC H730 RAID

Storage capacity and performance are defined by the ten front-accessible bays and the hardware RAID controller that manages them. Populating those bays with the right mix of solid-state and spinning media determines whether the server meets your IOPS and throughput targets.

Highlights

  • Dual 12-core Xeon processors deliver 24 threads for heavy workloads
  • 768GB DDR4 ECC memory supports large datasets and virtualisation
  • Ten 2.5-inch drive bays with PERC H730 RAID controller enable flexible storage
  • iDRAC8 Enterprise licence provides full remote management and monitoring
  • Dual 495W power supplies maintain uptime during component failure

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.5GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)5,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

How can I confirm the server is running correctly after initial setup?

Use the iDRAC8 Enterprise interface to review the system event log and run the built-in hardware diagnostics; the server ships with BIOS and firmware already updated and a full burn-in test completed.

What components are included and which must be purchased separately?

The unit includes two Xeon E5-2680 v3 processors, 768GB DDR4 ECC registered memory, a PERC H730 SAS controller, dual 495W power supplies, and an Intel I350/X540 network card with two 10GbE and two 1GbE ports; 2.5-inch drives and rail kit are not included.

Which memory capacity should I choose if I need room to expand later?

The system supports a maximum of 1.5TB DDR4, so the installed 768GB leaves half the capacity available for future upgrades.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.