We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server with ten 2.5 inch drive bays front panel

DELL

DELL PowerEdge R630 10SFF 2x Xeon E5-2697 v3 512GB DDR4

SKU CH-6CNH-XYC5M

A 1U rack server with ten 2.5-inch drive bays, dual Xeon E5-2697 v3 processors at 2.6GHz and 512GB DDR4 memory

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.6GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size512GB
  • Dual 14-core Xeon processors at 2.6 GHz deliver high parallel throughput
  • 512 GB DDR4 ECC memory supports large in-memory workloads
  • Ten 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
  • Dual 10 GbE and dual 1 GbE ports provide high-bandwidth connectivity
  • iDRAC8 Enterprise remote management simplifies lights-out administration

Dell PowerEdge R630 10-bay server

This Dell PowerEdge R630 is a 1U rack server with ten 2.5-inch drive bays. It ships with two Xeon E5-2697 v3 processors running at 2.6 GHz and 512 GB of DDR4 ECC registered memory. The PERC H730 SAS RAID controller manages storage, while dual 10 GbE and dual 1 GbE ports handle networking. Integrated graphics and iDRAC8 Enterprise remote management are included.

Suited for dense virtualisation

The twin 14-core CPUs and half-terabyte of DDR4 give strong multi-thread throughput for hypervisor hosts or in-memory databases. Ten SAS bays allow large local arrays under the H730 controller. Buyers who need more than two processor sockets, GPU acceleration, or storage interfaces other than SAS should evaluate other platforms.

512 GB DDR4 ECC registered memory

The installed 512 GB of DDR4 ECC registered RAM is the single specification that decides fit. It fills a substantial portion of the 1.5 TB maximum capacity and matches the dual Xeon memory controllers. Confirm your application requires this capacity and generation before purchase.

Highlights

  • Dual 14-core Xeon processors at 2.6 GHz deliver high parallel throughput
  • 512 GB DDR4 ECC memory supports large in-memory workloads
  • Ten 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
  • Dual 10 GbE and dual 1 GbE ports provide high-bandwidth connectivity
  • iDRAC8 Enterprise remote management simplifies lights-out administration

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size512GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)9,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

Which SAS controller is fitted and how many drives can it address?

The PERC H730 RAID controller manages up to 10 hot-plug 2.5-inch SAS bays in the front chassis.

What clearance and rails does the 1U chassis need for rack mounting?

The unit measures 36 x 24 x 10 inches and weighs 40 units; it requires a standard four-post rack and a compatible rail kit.

What is the correct sequence for installing the PERC H730 and updating firmware before adding drives?

Seat the controller in the dedicated internal slot, power on, run the iDRAC8 firmware update to the latest stable version, then insert SAS drives and configure virtual disks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.