DELL
DELL PowerEdge R630 10x2.5" 2x Xeon E5-2603 v3 768GB DDR4
A 1U rack server with ten 2.5-inch bays, dual Xeon E5-2603 v3 processors and 768 GB DDR4 memory
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual Xeon E5-2603 v3 processors deliver 12 cores for multi-threaded workloads
- 768GB DDR4 ECC registered memory supports large virtualisation deployments
- PERC H730 SAS controller provides hardware RAID for data protection
- iDRAC8 Enterprise licence enables remote management and monitoring
- 10 x 2.5-inch drive bays allow flexible storage configuration
10-bay 2.5-inch rack server
This 1U rack server fits ten 2.5-inch drive bays and ships with two Xeon E5-2603 v3 processors running at 1.6GHz. It targets virtualisation hosts, database nodes and compute clusters that need dense storage and 768GB of DDR4 ECC registered memory. Buyers who need larger 3.5-inch drives or GPU-accelerated workloads should look elsewhere.
Tool-less rails and cabled backplane
The chassis uses tool-less sliding rails and a cabled SAS backplane connected to the PERC H730 controller. Common issues include mismatched drive carriers for the 10-bay layout and firmware version gaps between the controller and iDRAC8 Enterprise; both are resolved by the pre-ship burn-in and latest firmware load. No drive carriers or drives are included.
Verify power, networking and rack depth
Confirm your rack supplies dual 495W redundant power feeds and that the 36-inch depth clears your cabinet doors. The installed Intel I350/X540 card provides two 10GbE and two 1GbE ports; check switch compatibility and cabling before ordering. Maximum memory capacity is 1.5TB across 24 DIMM slots if future expansion is planned.
Highlights
- Dual Xeon E5-2603 v3 processors deliver 12 cores for multi-threaded workloads
- 768GB DDR4 ECC registered memory supports large virtualisation deployments
- PERC H730 SAS controller provides hardware RAID for data protection
- iDRAC8 Enterprise licence enables remote management and monitoring
- 10 x 2.5-inch drive bays allow flexible storage configuration
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 9,60 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How can I verify the server posts and shows all 768GB DDR4 memory after first power-on?
Watch the POST screen for the memory count to reach 768GB and confirm both Xeon E5-2603 v3 CPUs are detected; then log into iDRAC8 Enterprise to review the system health inventory.
The listing says no drives are installed, so which drive types and caddies must I purchase separately for the 10 2.5-inch bays?
Buy 2.5-inch SATA or SAS drives and matching Dell 2.5-inch caddies; the PERC H730 SAS controller supports both interfaces across all 10 bays.
Should I choose the 768GB configuration or add more DDR4 modules up to the 1.5TB maximum?
Select 768GB for typical virtualization or database workloads; add modules later only if your application demands more than 768GB total capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



