We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server with eight 2.5 inch drive bays front panel

DELL

DELL PowerEdge R630 8SFF 1x Xeon E5-2697 v3 384GB DDR4

SKU CH-P53W-K7AX4

A 1U rack server with eight 2.5-inch drive bays, one 2.6 GHz 14-core Xeon E5-2697 v3 and 384 GB DDR4 ECC memory

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.6GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual-socket ready for future CPU expansion
  • 384 GB DDR4 ECC memory installed
  • PERC H730 RAID controller for data protection
  • iDRAC8 Enterprise enables remote server management
  • 8-bay 2.5" chassis supports high-density storage

Built for dense virtualisation workloads

The Dell PowerEdge R630 packs a 14-core Xeon E5-2697 v3 at 2.6 GHz and 384 GB of DDR4 ECC memory into a 1U rack chassis. Eight 2.5-inch drive bays and a PERC H730 SAS controller give flexible local storage for databases or hypervisor hosts. iDRAC8 Enterprise provides full out-of-band management for remote data-centre operations.

Dual 495 W supplies share load efficiently

Redundant power supplies keep the server running during a module failure while maintaining balanced draw across both units. The 1U form factor relies on high-speed internal fans that ramp under heavy CPU utilisation, so rack airflow planning remains essential. Integrated graphics and the Intel I350/X540 network card add minimal thermal load compared with discrete accelerators.

Ships without drives or rails by default

No storage media are installed, letting you populate bays with SATA or SAS disks matched to capacity and endurance needs. Rail kits are available on request rather than included, so cabinet mounting must be planned separately. Firmware is updated to the latest stable release before dispatch, reducing first-boot configuration time.

Highlights

  • Dual-socket ready for future CPU expansion
  • 384 GB DDR4 ECC memory installed
  • PERC H730 RAID controller for data protection
  • iDRAC8 Enterprise enables remote server management
  • 8-bay 2.5" chassis supports high-density storage

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)2,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

How do I install the PERC H730 RAID controller and what step is commonly missed?

Seat the PERC H730 in the dedicated internal slot, connect the SAS cables to the 8SFF backplane, then configure the virtual disks in the controller BIOS before the OS install.

Which components will need replacement first in the 384GB DDR4 ECC Registered memory configuration?

The 384GB DDR4 ECC Registered DIMMs are rated for continuous operation; plan to replace the 495W power supplies or system fans before the memory requires service.

What thermal or power limit appears first when the 14-core Xeon E5-2697 v3 runs at 2.6GHz under sustained load?

The dual 495W power supplies and chassis airflow set the practical ceiling; the CPU will throttle before the 1.5TB memory capacity or 8-drive backplane becomes a bottleneck.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.