DELL
DELL PowerEdge R630 8SFF 2x Xeon E5-2603 v3 512GB DDR4 rack server
A 1U rack server with dual Xeon E5-2603 v3 processors, 512GB DDR4 memory and eight 2.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon E5-2603 v3 CPUs deliver 12 cores for multi-threaded workloads
- 512GB DDR4 ECC memory supports large virtualisation deployments
- Eight 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
- iDRAC8 Enterprise provides remote management and firmware updates
- Redundant 495W power supplies maintain uptime during component failure
Dell PowerEdge R630 8SFF server
The Dell PowerEdge R630 is a 1U rack-mount server system built for dense compute workloads. It arrives with two Intel Xeon E5-2603 v3 processors running at 1.6GHz and 512GB of DDR4 ECC registered memory. The chassis supports up to eight 2.5-inch drive bays and includes a PERC H730 SAS controller for storage arrays.
Suited for virtualisation hosts and database nodes
This configuration suits teams that need a high memory-to-CPU ratio for virtualisation hosts, in-memory databases or application servers. Remote management is handled by iDRAC8 Enterprise for out-of-band control. Buyers who need installed drives or a different drive-count chassis should look elsewhere because storage is not included and the backplane uses SATA and SAS interfaces only.
512GB DDR4 ECC registered memory
The single specification that decides fit is the 512GB DDR4 ECC registered memory population. The system supports a maximum of 1.5TB across 24 DIMM slots, so the current load leaves room for expansion. Verify that your workload fits within the two-socket, six-core-per-socket processor layout before ordering.
Highlights
- Dual Xeon E5-2603 v3 CPUs deliver 12 cores for multi-threaded workloads
- 512GB DDR4 ECC memory supports large virtualisation deployments
- Eight 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
- iDRAC8 Enterprise provides remote management and firmware updates
- Redundant 495W power supplies maintain uptime during component failure
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 7,68 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How many additional DDR4 modules can I install before reaching the 1.5 TB ceiling?
The board accepts up to 1.5 TB total, so the remaining capacity depends on the size of the 512 GB already installed.
Which component hits its limit first when the dual 1.6 GHz Xeon 2603 v3 CPUs run at full load continuously?
The two 495 W power supplies set the sustained power envelope for the 630 chassis.
What noise and heat levels should I expect from the twin 495 W supplies and system fans during 24/7 operation?
Dual 495 W units with redundant cooling keep the 1U rack server within Dell thermal specs for continuous duty.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



