We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R630 8SFF 2x Xeon E5-2630 v4 768GB DDR4 No Drive Server

SKU CH-3N5S-ABS7V

A 1U rack server with dual Xeon 10-core 2.2 GHz CPUs, 768 GB DDR4 ECC memory, a PERC H730 SAS controller and eight 2.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual 10-core Xeon processors at 2.2GHz deliver strong multi-threaded performance
  • 768GB DDR4 ECC memory supports large virtualisation and database workloads
  • PERC H730 SAS controller enables flexible RAID arrays for data protection
  • iDRAC8 Enterprise licence provides full remote management and monitoring
  • Eight 2.5-inch drive bays allow high-density storage configuration

Dense compute node for virtualisation clusters

The Dell PowerEdge R630 packs two Xeon E5-2630 v4 processors and 768 GB of DDR4 ECC registered memory into a 1U rack chassis with eight 2.5-inch drive bays. It targets organisations that need high core counts and large memory capacity for hypervisor hosts, database nodes or HPC workloads.

Tool-free rail installation with cabling constraints

The server slides into a standard rack on optional rails and the PERC H730 SAS controller connects to the backplane without extra cables. The 495 W redundant power supplies are hot-swap, but the short chassis depth means long add-in cards may not fit and front drive access requires careful cable routing.

Sustained throughput with dual 10 GbE links

Under continuous load the twin 10 GbE ports and the H730 cache keep storage traffic moving while the 10-core CPUs maintain steady clock speeds. The iDRAC8 Enterprise licence provides remote console and power control even when the host OS is unresponsive.

Highlights

  • Dual 10-core Xeon processors at 2.2GHz deliver strong multi-threaded performance
  • 768GB DDR4 ECC memory supports large virtualisation and database workloads
  • PERC H730 SAS controller enables flexible RAID arrays for data protection
  • iDRAC8 Enterprise licence provides full remote management and monitoring
  • Eight 2.5-inch drive bays allow high-density storage configuration

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)16,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

How can I verify the PERC H730 RAID controller is operating correctly after installation?

During POST the controller initialisation banner appears, then the iDRAC8 Enterprise web interface shows the controller status as Optimal with zero media errors and both 495 W power supplies reporting healthy.

Which components are included in the shipment and what must be sourced separately?

The unit ships with 2 Xeon E5-2630 v4 processors, 768 GB DDR4 ECC registered memory, the PERC H730 SAS controller, dual 495 W supplies, the Intel I350/X540 2 x 10 GbE + 2 x 1 GbE network card and iDRAC8 Enterprise; 2.5" drives and rail kit are not included.

Which memory capacity should I select if I need room to expand beyond the installed 768 GB?

The R630 supports up to 1.5 TB of DDR4, so the current 768 GB configuration leaves half the maximum capacity available for future module additions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.