We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server with eight front drive bays

DELL

DELL PowerEdge R630 8SFF 2x Xeon E5-2640 v3 2.6GHz 512GB DDR4 rack server

SKU CH-X4NC-2YPE1

Dual Xeon E5-2640 v3 at 2.6GHz with 512GB DDR4 in an 8-bay 2.5-inch rack chassis

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.6GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size512GB
  • Dual Xeon E5-2640 v3 processors power demanding workloads
  • 512GB DDR4 memory supports large virtualised environments
  • Eight 2.5-inch drive bays enable flexible storage configurations
  • PERC H730 SAS controller provides hardware RAID capability
  • iDRAC8 Enterprise licence allows remote server management

Dell PowerEdge R630 8SFF dual Xeon server

The Dell PowerEdge R630 is a 1U rack server fitted with two Intel Xeon E5-2640 v3 processors at 2.6GHz and 512GB of DDR4 ECC registered memory. It uses an 8-bay 2.5-inch chassis with a PERC H730 SAS controller and integrated graphics. The system includes iDRAC8 Enterprise remote management and dual 495W power supplies.

Suited for dense virtualisation

This configuration fits environments that need high core counts and large memory capacity in a single rack unit. Buyers who require installed drives, GPU acceleration or a single-socket layout should look at other platforms. The 8-bay limit also means it is not for deployments needing more local drive slots without external enclosures.

512GB DDR4 ECC registered memory with 1.5TB maximum

The installed 512GB of DDR4 ECC registered memory is the key specification; it determines whether the server can hold the working set for databases, virtual machines or analytics jobs. The platform supports up to 1.5TB total, so expansion is possible if the workload grows beyond the factory configuration.

Highlights

  • Dual Xeon E5-2640 v3 processors power demanding workloads
  • 512GB DDR4 memory supports large virtualised environments
  • Eight 2.5-inch drive bays enable flexible storage configurations
  • PERC H730 SAS controller provides hardware RAID capability
  • iDRAC8 Enterprise licence allows remote server management

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size512GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)8,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What drive bays must the chassis provide for the 2.5-inch drives to install?

The 8SFF chassis accepts up to eight 2.5-inch SATA or SAS drives, so the bays must be 2.5-inch form factor with SAS/SATA backplane connections.

Will the PERC H730 RAID controller recognise older SATA SSDs kept from a previous server?

The PERC H730 supports SATA and SAS interfaces, so legacy SATA SSDs will be detected and can be configured in RAID volumes.

How can I confirm the iDRAC8 Enterprise remote management is active after first boot?

Connect to the iDRAC network port, log in with the default credentials, and verify the dashboard shows firmware version, system health and the Enterprise licence status.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.