We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R630 8SFF 2x Xeon E5-2640 v3 384GB DDR4 rack server

SKU CH-341H-K61ZS

Rack server with dual 2.6 GHz Xeon processors, 384 GB DDR4 memory, eight 2.5-inch drive bays and PERC H730 SAS controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.6GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2640 v3 CPUs provide 20 MB cache for faster data access
  • 384 GB DDR4 memory supports large datasets and virtualisation
  • Eight 2.5" drive bays with PERC H730 SAS controller enable flexible storage
  • iDRAC8 Enterprise licence allows remote management and monitoring
  • Dual 495 W power supplies deliver redundancy for continuous operation

Dense compute node

The Dell PowerEdge R630 packs two Xeon E5-2640 v3 processors at 2.6GHz and 384GB of DDR4 ECC memory into a 1U rack form factor with eight 2.5-inch drive bays. A PERC H730 SAS controller manages SATA storage while iDRAC8 Enterprise handles remote management. Dual 495W supplies and a quad-port 10GbE/1GbE card complete the baseline configuration.

Virtualisation hosts needing maximum memory per U

This server suits environments that prioritise core count and RAM density over local flash performance — typical workloads include hypervisor clusters, in-memory databases and container platforms. Buyers who require hardware-accelerated graphics or more than eight drive bays in a single chassis should evaluate alternative platforms.

PERC H730 RAID controller

The installed H730 governs every drive in the eight-bay backplane and determines which RAID levels and stripe sizes are available. Confirm that its SAS/SATA feature set matches the intended storage topology before committing to this chassis.

Highlights

  • Dual Xeon E5-2640 v3 CPUs provide 20 MB cache for faster data access
  • 384 GB DDR4 memory supports large datasets and virtualisation
  • Eight 2.5" drive bays with PERC H730 SAS controller enable flexible storage
  • iDRAC8 Enterprise licence allows remote management and monitoring
  • Dual 495 W power supplies deliver redundancy for continuous operation

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)8,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack depth and width does the 36 x 24 x 10 inch chassis require?

The chassis measures 36 inches deep by 24 inches wide by 10 inches high and fits a standard four-post rack with square-hole rails.

Which firmware step is often skipped when installing the PERC H730 controller?

After seating the controller, update the iDRAC8 and PERC firmware to the latest stable versions before creating any virtual disks.

When should the 495 W redundant power supplies be replaced?

Replace a supply if the iDRAC8 logs a critical power-supply fault or the front-panel amber LED stays lit after a cold boot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.